ADA4932-1YCPZ-R7
ANALOG DEVICES ADA4932-1YCPZ-R7 差分放大器, 低功率, 1 放大器, 500 µV, 66 dB, 560 MHz, -40 °C, 105 °C
Product Details
The ADA4932-1 / ADA4932-2 are the next generation AD8132 with higher performance and lower noise and power consumption. They are an ideal choice for driving high performance ADCs as a single-ended-to-differential or differential-to-differential amplifier. The output common-mode voltage is user adjustable by means of an internal common-mode feedback loop, allowing the ADA4932-1 / ADA4932-2 output to match the input of the ADC. The internal feedback loop also provides exceptional output balance as well as suppression of even-order harmonic distortion products.
With the ADA4932-1 / ADA4932-2, differential gain configurations are easily realized with a simple external four-resistor feedback network that determines the closed-loop gain of the amplifier.
The ADA4932-1 / ADA4932-2 were fabricated using the Analog Devices, Inc., proprietary silicon-germanium SiGe complementary bipolar process, enabling it to achieve low levels of distortion and noise at low power consumption.
The low offset and excellent dynamic performance of the ADA4932-1/ADA4932-2 make them well suited for a wide variety of data acquisition and signal processing applications.
The ADA4932-1 is available in a 16-lead LFCSP, and the ADA4932-2 is available in a 24-lead LFCSP. The pinouts are optimized to facilitate the printed circuit board PCB layout and minimize distortion. The ADA4932-1/ADA4932-2 are specified to operate over the −40°C to +105°C temperature range; both operate on supplies between +3 V and ±5 V.
Applications
- .
- ADC drivers
- .
- Single-ended-to-differential converters
- .
- IF and baseband gain blocks
- .
- Differential buffers
- .
- Line drivers
### Features and Benefits
- .
- High performance at low power
- .
- High speed
- .
- −3 dB bandwidth of 560 MHz, G = 1
- .
- 0.1 dB gain flatness to 300 MHz
- .
- Slew rate: 2800 V/μs, 25% to 75%
- .
- Fast 0.1% settling time of 9 ns
- .
- Low power: 9.6 mA per amplifier
- .
- Low harmonic distortion
- .
- 100 dB SFDR at 10 MHz
- .
- 90 dB SFDR at 20 MHz
- .
- Low input voltage noise: 3.6 nV/√Hz
- .
- ±0.5 mV typical input offset voltage
- .
- Externally adjustable gain
- .
- Can be used with gains less than 1
- .
- Differential-to-differential or single-ended-to-differential operation
- .
- Adjustable output common-mode voltage
- .
- See data sheet for additional features