884X-RTD

Cable Assembly Test Lead 0.228m 4Banana Plug 1POS PL

** 100 Ohm RTD Temperature Probe

Features:

* **Manufactured using a coil suspension element design for increased shock and vibration resistance

**

* **Mineral-insulated sheath with a minimum bend radius of 19 mm 3/4 in for flexibility and durability

Additional Specs:

* Resistance: Nominal 100 O

* Temperature coefficient: 0.00385 O/O ºC nominal

* Temperature range: -200 C to 300 ºC transition and cable temperature: 0 ºC to 25% ºC

* Drift rate: + 0.13 ºC at 0 ºC after 1000 hours at 300 ºC

* Sheath Material: 316 stainless steel

* Leads: PTFE-insulated, nickel-plated stranded copper, 22 AWG

* Termination: 4-wire banana

* Time constant: Four seconds maximum for 63.2% response to step change in water moving at 3 fps

* Bending radius: 19 mm 3/4 in except for 50 mm 2 in area of sheath near tip

* Calibration: Includes manufacturer’s NIST-traceable calibration and table with R vs. T values in 1 ºC increments from -196 ºC to 300 ºC. Callendar-van Dusen coefficients included

* Immersion: At least 100 mm 4 in recommended

* Accuracy includes calibration uncertainty and short-term stability:

±0.50 ºC at -196 ºC

±0.050 ºC at 0 ºC

±0.052 ºC at 200 ºC

±0.055 ºC at 300 ºC

* Size: 9 in L x 3/16 in diameter

* Marking: Each RTD is marked with the name and part number