TLV1543
10 位 200 kSPS ADC 串行 输出,内置自检测模式,内部 S,引脚兼容。 TLC1543,11 通道
The C, TLV1543I, and TLV1543M are CMOS 10-bit, switched-capacitor, successive-approximation, analog-to-digital converters. These devices have three inputs and a 3-state output [chip select CS\\, input-output clock I/O CLOCK, address input ADDRESS, and data output DATA OUT] that provide a direct 4-wire interface to the serial port of a host processor. The devices allow high-speed data transfers from the host.
In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A/D conversion, the end-of-conversion EOC output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range.
The TLV1543C is characterized for operation from 0°C to 70°C. The TLV1543I is characterized for industrial temperature range of -40°C to 85°C. The TLV1543M is characterized for operation over the full military temperature range of 55°C to 125°C.
- .
- 3.3-V Supply Operation
- .
- 10-Bit-Resolution A/D Converter
- .
- 11 Analog Input Channels
- .
- Three Built-In Self-Test Modes
- .
- Inherent Sample and Hold
- .
- Total Unadjusted Error...±1 LSB Max
- .
- On-Chip System Clock
- .
- End-of-Conversion EOC Output
- .
- Pin Compatible With TLC1543
- .
- CMOS Technology