SN74CB3T3384

具有 5V 容限电平转换器的 10 位 FET 2.5V/3.3V 低电压总线开关

The is a high-speed TTL-compatible FET bus switch with low ON-state resistance ron, allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks VCC. The SN74CB3T3384 supports systems using 5-V TTL, 3.3-V LVTTL, and 2.5-V CMOS switching standards, as well as user-defined switching levels see Figure 1.

The SN74CB3T3384 is organized as two 5-bit bus switches with separate ouput-enable 1OE\, 2OE\\ inputs. It can be used as two 5-bit bus switches or as one 10-bit bus switch. When OE\ is low, the associated 5-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\ is high, the associated 5-bit bus switch is OFF, and a high-impedance state exists between the A and B ports.

This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

.

Output Voltage Translation Tracks VCC

.

Supports Mixed-Mode Signal Operation On All Data I/O Ports

.

5-V Input Down To 3.3-V Output Level Shift With 3.3-V VCC

.

5-V/3.3-V Input Down To 2.5-V Output Level Shift With 2.5-V VCC

.

5-V-Tolerant I/Os With Device Powered-Up or Powered-Down

.

Bidirectional Data Flow, With Near-Zero Propagation Delay

.

Low ON-State Resistance ron Characteristics ron = 5 Typical

.

Low Input/Output Capacitance Minimizes Loading CioOFF \- 5 pF Typical

.

Data and Control Inputs Provide Undershoot Clamp Diodes

.

Low Power Consumption ICC = 40µA Max

.

VCC Operating Range From 2.3 V to 3.6 V

.

Data I/Os Support 0 to 5-V Signaling Levels 0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V

.

Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs

.

Ioff Supports Partial-Power-Down Mode Operation

.

Latch-Up Performance Exceeds 250 mA Per JESD 17

.

ESD Performance Tested Per JESD 22

.

2000-V Human-Body Model A114-B, Class II

.

1000-V Charged-Device Model C101

.

Supports Digital Applications: Level Translation, Memory Interleaving, Bus Isolation

.

Ideal for Low-Power Portable Equipment