ICB2FL02G

智能镇流器控制IC，适用于荧光灯镇流器 Smart Ballast Control IC for Fluorescent Lamp Ballasts

Description:

The 2nd Generation Smart Ballast Control IC integrates all functions required to operate FL lamps such as preheat-, ignition- and run-mode and protection features. Digital mixed-signal power control is employed enabling speedy, cost-effective and stable ballast designs with a minimum number of external components. Reliable and robust high voltage isolation is achieved using ’s proprietary Coreless Transformer Technology CLT. The ICB2FL02G is functionally similar to the ICB2FL01G with a number of optimizations to operating frequencies and detection thresholds for dimmable ballast designs.

Summary of Features:

.

Integrated critical conduction mode PFC stage with enhanced dynamic PFC performance over wide load range

.

Intelligent digital-/mixed-signal lamp inverter control

.

Integrated high-voltage level-shift half-bridge driver

.

Optimized for dimmable FL/CFL ballasts

.

Drives up to 4 lamps with few external components required

.

Built-in protection functions such as Over-Voltage Protection OVP and Over-Current Protection OCP

.

Adjustable end-of-life detection in multi-lamp topologies and detection of capacitive mode operation

.

Able to handle lamp chokes with high saturation behavior

.

Special in-circuit test mode for faster test time

.

Parameters set with resistors only

.

Separate adjustable levels of lamp overload and rectifier effect detection EoL1, EoL2

.

Intelligent discrimination between surge and half-bridge overcurrent events

.

Self-adapting dead time adjustment of the half-bridge driver

.

Highly accurate timing and frequency control over wide temperature range -25 to 125 °C

Benefits:

.

Reduced BOM cost by optimized lamp choke size

.

„Halving the time for key tests such as end-of-life detection and preheat/operation modes

.

Reduced system cost and improved ballast stability

.

Suitable for dimming & multi-power ballasts

.

„Enables ballast compatibility with a wider range of lamp types

.

Lamp can automatically restart following surge events and handle correctly EOL events

.

Eases design of multi-power ballasts and reduces EMI

.

Reliable, stable ballast designs