效果视频
这个是主界面
这个是主菜单界面
这个是设置时间的子界面
这个是设置日期
设置背景光
这是设置了按键音和闹铃以后，主界面出现状态标志
闹铃的界面，喇叭出现铃声。
生日倒计时提醒功能。
全部完整的源代码下载：http://www.ruidan.com/bbs/dpj-20391-1.html
下面是ds1602部分的驱动程序：
/*------------------------------------
名称:DS1302Driver
编写:YuMin_Dong
时间:2013.01.20
------------------------------------*/
#ifndef _DS1302_H_
#define _DS1302_H_
/*------------------------------------
I/O位定义
------------------------------------*/
sbit DS_R=P2^4;
sbit DS_SCL=P2^6;
sbit DS_IO=P2^5;
/*------------------------------------
宏定义
------------------------------------*/
#define DS_RST_CLR DS_RST=0
#define DS_SCL_CLR DS_SCL=0
#define DS_IO_CLR DS_IO=0
#define DS_IO_SET DS_IO=1
#define DS_SCL_SET DS_SCL=1
#define DS_RST_SET DS_RST=1
#define SECD_AESS 0x80//秒 寄存地址
#define MINU_ADDRESS 0x82//分 寄存地址
#define HOUR_ADDRESS 0x84//时 寄存地址
#define D_ADDRESS 0x86//日 寄存地址
#define MOH_ADDRESS 0x88//月 寄存地址
#define WEEK_ADDRESS 0x8a//周 寄存地址
#define YEAR_ADDRESS 0x8c//年 寄存地址
#define CONTROL_ADDRESS 0x8e//控制寄存器地址
/*------------------------------------
全局变量定义
------------------------------------*/
UINT8 Year,Month,Date,Hour,Minute,nd,Week;//年月日时分秒周的暂存
bit Set_Hour;//为1表示设置时钟,为0表示设置分钟,秒钟在设置时间的时候停摆清零
UINT8 Set_Date;//设置年月日选择标识
bit Menu0;//一号子菜单调时位
UINT8 Set_Bell;
UINT8 Bell_Hour,Bell_Minute;
code UINT8 WEEK_TAB[12]={0,3,3,6,1,4,6,2,5,0,3,5};//星期补偿
/*------------------------------------
Write函数
------------------------------------*/
void DS1302_WriteByte(UINT8 address,UINT8 byte)
{
UINT8 i;
address=address&0xfe;//R/W控制位低电位写
DS_RST_SET;
for(i=0;i<8;i++)//发送地址,找寄存器
{
if(address&0x01)
DS_IO_SET;
else DS_IO_CLR;
address>>=1;
DS_SCL_SET;
DS_SCL_CLR;
}
for(i=0;i<8;i++)//发送数据到寻找到的寄存器
{
if(byte&0x01)
DS_IO_SET;
else DS_IO_CLR;
byte>>=1;
DS_SCL_SET;
DS_SCL_CLR;
}
DS_RST_CLR;
}
/*------------------------------------
Read函数
------------------------------------*/
UINT8 DS1302_ReadByte(UINT8 address)
{
UINT8 i,byte;
address=address|0x01;
DS_RST_SET;
for(i=0;i<8;i++)//发送地址,找到寄存器
{
if(address&0x01)
DS_IO_SET;
else DS_IO_CLR;
address>>=1;
DS_SCL_SET;
DS_SCL_CLR;
}
for(i=0;i<8;i++)//从找到的寄存器中读取数据
{
byte>>=1;
if(DS_IO)
byte|=0x80;
DS_SCL_SET;
DS_SCL_CLR;
}
DS_RST_CLR;
return byte;
}
/*------------------------------------
读取时间
------------------------------------*/
void DS1302_ReadTime()
{
Hour=DS1302_ReadByte(HOUR_ADDRESS);
Minute=DS1302_ReadByte(MINUTE_ADDRESS);
Second=DS1302_ReadByte(SECOND_ADDRESS)&0x7f;
}
/*------------------------------------
写入时间
------------------------------------*/
void DS1302_WriteTime()
{
DS1302_WriteByte(CONTROL_ADDRESS,0X00);//关闭写保护
DS1302_WriteByte(HOUR_ADDRESS,Hour);
DS1302_WriteByte(MINUTE_ADDRESS,Minute);
DS1302_WriteByte(SECOND_ADDRESS,Second&0x7f);//清零秒
DS1302_WriteByte(CONTROL_ADDRESS,0x80);//打开写保护
}
/*------------------------------------
显示时间
------------------------------------*/
void Display_Time()
{
_WriteCommand(0x34);//16x32的时钟显示,先开始扩充指令模式
LCD_WriteCommand(0x36);//开启绘图模式
LCD_SendImg16x32(0,1,*(User_16x32+Hour/16),0|Set_Hour);
LCD_SendImg16x32(1,1,*(User_16x32+Hour%16),0|Set_Hour);
LCD_SendImg16x32(2,1,*(User_16x32+10),0);
LCD_SendImg16x32(3,1,*(User_16x32+Minute/16),0|(!Set_Hour&&Menu0));
LCD_SendImg16x32(4,1,*(User_16x32+Minute%16),0|(!Set_Hour&&Menu0));
LCD_SendImg16x32(5,1,*(User_16x32+10),0);
LCD_SendImg16x32(6,1,*(User_16x32+Second/16),0);
LCD_SendImg16x32(7,1,*(User_16x32+Second%16),0);
//LCD_WriteCommand(0x30);
}
/*------------------------------------
设置闹铃界面填充
------------------------------------*/
void Display_Bell()
{
LCD_WriteCommand(0x34);//16x32的时钟显示,先开始扩充指令模式
LCD_WriteCommand(0x36);//开启绘图模式
LCD_SendImg16x32(0,1,*(User_16x32+Bell_Hour/10),Set_Bell==0);
LCD_SendImg16x32(1,1,*(User_16x32+Bell_Hour%10),Set_Bell==0);
LCD_SendImg16x32(2,1,*(User_16x32+10),0);
LCD_SendImg16x32(3,1,*(User_16x32+Bell_Minute/10),Set_Bell==1);
LCD_SendImg16x32(4,1,*(User_16x32+Bell_Minute%10),Set_Bell==1);
LCD_SendImg16x32(5,1,*(User_16x32+10),0);
LCD_SendImg16x32(6,1,*User_16x32,0);
LCD_SendImg16x32(7,1,*User_16x32,0);
}
/*------------------------------------
读取日期
------------------------------------*/
void DS1302_ReadDate()
{
Year=DS1302_ReadByte(YEAR_ADDRESS);
Month=DS1302_ReadByte(MONTH_ADDRESS);
Date=DS1302_ReadByte(DATE_ADDRESS);
}
/*------------------------------------
写入日期
------------------------------------*/
void DS1302_WriteDate()
{
DS1302_WriteByte(CONTROL_ADDRESS,0X00);//关闭写保护
DS1302_WriteByte(DATE_ADDRESS,Date);
DS1302_WriteByte(MONTH_ADDRESS,Month);
DS1302_WriteByte(YEAR_ADDRESS,Year);//清零秒
DS1302_WriteByte(CONTROL_ADDRESS,0x80);//打开写保护
}
/*------------------------------------
设置时填充大数字日期
------------------------------------*/
void Display_SetDate()
{
LCD_WriteCommand(0x34);
LCD_WriteCommand(0x36);
LCD_SendImg16x32(0,1,*(User_16x32+Year/16),Set_Date==0);
LCD_SendImg16x32(1,1,*(User_16x32+Year%16),Set_Date==0);
LCD_SendImg16x32(2,1,*(User_16x32+11),0);
LCD_SendImg16x32(3,1,*(User_16x32+Month/16),Set_Date==1);
LCD_SendImg16x32(4,1,*(User_16x32+Month%16),Set_Date==1);
LCD_SendImg16x32(5,1,*(User_16x32+11),0);
LCD_SendImg16x32(6,1,*(User_16x32+Date/16),Set_Date==2);
LCD_SendImg16x32(7,1,*(User_16x32+Date%16),Set_Date==2);
//LCD_WriteCommand(0x30);
}
/*------------------------------------
星期转换
------------------------------------*/
UINT8 Conver_Week(bit c,UINT8 year,UINT8 month,UINT8 date)
{
UINT8 temp1,temp2,week;
temp1=year/16;
temp2=year%16;
year=temp1*10+temp2;
temp1=month/16;
