IPROBER 520
数据手册.pdf
AIM-TTI Instruments
测试仪器
电流探头, BNC插头, 探头尖, 20 A, 10 mA, AIM-TTI Oscilloscopes
The Aim I-prober 520 is a unique current measurement device. Measurement of current normally requires it to be passed through a closed magnetic loop, typically using a split clamp device. Whereas this is suitable for individual wires, it is of no use for measuring current in PCB tracks. The I-Prober 520 uses positional H-field measurement. By placing the insulated tip of the probe onto a PCB track, the current flowing in the track can be observed and measured. The I-Prober 520 is supplied with a clip-on toroid assembly which converts it into a closed magnetic circuit probe for measuring current within a wire.
- .
- Current measurement from isolated probing of conductor
- .
- Dynamic range of 10mA to 20A peak to peak
- .
- Wide bandwidth of DC to 5MHz
- .
- Low noise equivalent to less than 6mA rms
- .
- Safety rated to 300V Cat II
- .
- Suitable for connection to any oscilloscope
- .
- High accuracy general purpose H-field probe
- .
- Convertible into "closed magnetic circuit" current probe