IPSLAT-G0500-5
数据手册.pdf
Cynergy3 Components
工业控制
压力传感器, 500 mbar, 模拟, 量规, 28 VDC, G1/4 1/4英寸BSP
The from Cynergy3 is an IPSLAT series low range, intrinsically safe pressure sensor. The IPSLAT is suitable for use in a wide range of applications in hazardous areas. The probe uses a piezoresistive silicon sensor, giving excellent media compatibility within an oil filled 316L stainless steel housing. The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially in high vibration/shock applications. Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate.
- .
- Input pressure range from 0bar to 500mbar gauge
- .
- Supply voltage is 10VDC to 28VDC, output current of 4mA to 20mA
- .
- ATEX / IECEx II Ex ia IIC T4 Ga Ta approval, CE compliant
- .
- Two wire system
- .
- Accuracy < ±0.25% / FS BFSL, setting errors offsets zero & full scale< ±0.5% / FS
- .
- 316 stainless steel housing material and viton "O" ring seals material
- .
- Operational life is greater than 100 x 10^6 cycles
- .
- Insulation resistance is greater than 50Mohm at 50VDC
- .
- Operating temperature range from -20°C to +120°C
- .
- IP65 rated DIN43650 connector, 1/4" BSPP male connection