FSB50550B

Intelligent Power Module, 500V, 5A

The S is an advanced Motion SPM 5 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC and PMSM motors. These modules integrate optimized gate drive of the built-in MOSFETs FRFET technology to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts and thermal monitoring. The built-in high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module"s internal MOSFETs. Separate open-source MOSFET terminals are available for each phase to support the widest variety of control algorithms.

Features

---

 |

.

UL Certified No. E209204 UL1557

.

Optimized for over 10 kHz Switching Frequency

.

500 V FRFET MOSFET 3-Phase Inverter with Gate Drivers and Protection

.

Built-In Bootstrap Diodes Simplify PCB Layout

.

Separate Open-Source Pins from Low-Side MOSFETs for Three-Phase Current-Sensing

.

Active-HIGH Interface, Works with 3.3 / 5 V Logic, Schmitt-trigger Input

.

Optimized for Low Electromagnetic Interference

.

HVIC Temperature-Sensing Built-In for Temperature Monitoring

.

HVIC for Gate Driving and Under-Voltage Protection

.

Isolation Rating: 1500 Vrms / min.

.

RoHS Compliant