FUSB302TMPX

接口, USB, 可编程USB Ｃ型控制器, 2.7 V, 5.5 V, MLP, 14 引脚

The FUSB302T targets system designers looking to implement USB Type-C wall charger or Travel adaptor. In addition to the default SRC function, the device supports DRP/ SRC/ SNK with low amount of programmability. The FUSB302T enables the USB Type-C detection including attach/detach, and orientation. The FUSB302T integrates the physical layer of the USB BMC power delivery protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.

Features

---

 |

.

Dual-Role Functionality with Autonomous DRP Toggle

.

Ability to connect as either a host or a device based on what has been attached

.

Software configurable either as a dedicated host, dedicated device, or dual role.

.

Dedicated devices can operate both on a Type-C receptacle or a Type-C plug with a fixed CC and VCONN channel.

.

Full Type-C 1.2 Support. Integrates the following functionality of the CC pin

.

Attach/Detach Detection as Host

.

Current Capability Indication as Host

.

Current Capability Detection as Device

.

Audio Adapter Accessory Mode

.

Debug Accessory Mode

.

Active Cable Detection

.

Integrates CCx to VCONN switch with over-current limiting for powering USB3.1 Full Featured cables

.

USB Power Delivery PD 2.0, Version 1.1 Support

.

Automatic GoodCRC Packet Response

.

Automatic soft reset packet sent with retries if needed

.

Automatic retries of sending a packet if a GoodCRC is not received

.

Default CC open for SRC application.

.

Automatic Hard Reset Ordered Set Sent

.

Packaged in :

.

Low Power Operation: ICC = 25 µA Typical

.

14-lead MLP 2.5 mm x 2.5 mm, 0.5 mm Pitch