DRV8816PWP
TEXAS INSTRUMENTS DRV8816PWP 芯片, 电机驱动器, 2.8A, HTSSOP-16
The is a dual half h-bridge Motor Driver provides a versatile power driver solution with two independent 1/2-H bridge drivers. The device can drive one brushed DC motor or one winding of a stepper motor, as well as other devices like solenoids. A simple INx/ENx interface allows easy interfacing to controller circuits. The output stages use N-channel power MOSFETs configured as 1/2-H-bridges. The DRV8816 is capable of peak output currents up to ±2.8A and operating voltages up to 38V. An internal charge pump generates needed gate drive voltages. A low-power sleep mode is provided which shuts down internal circuitry to achieve very-low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin. Internal protection functions are provided for UVLO, charge pump fault, OCP, short-to-supply protection, short-to-ground protection, over-temperature warning and over-temperature shutdown. Fault conditions are indicated through a nFAULT pin.
- .
- H-bridge motor driver individual
- .
- Low-power sleep mode
- .
- 100% PWM Supported
- .
- Configurable over-current limit
- .
- VBB under-voltage lockout UVLO protection
- .
- Charge pump under-voltage CPUV protection
- .
- Over-current Protection OCP protection
- .
- Short-to-supply protection STS protection
- .
- Short-to-ground protection STG protection
- .
- Over-temperature Warning OTW protection
- .
- Over-temperature Shutdown OTS protection
- .
- Fault condition indication pin nFAULT protection
- .
- Green product and no Sb/Br
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.