CBI4810A

54 W 单输出 48 V 10 A 3 充电电平 Din 轨 IP20 DC-UPS 系统

CBI All In One UPS Power Solutions combine the requirements for several applications in just one device which can be used as power supply unit, battery charger, battery care module or backup module. The available power is automatically distributed among load and battery, while supplying power to the load always is the first priority. The maximum available current of the load output is two times the value of the device’s rated current.

If the device is disconnected from the main power source, the battery will supply the load until the battery voltage reaches 1.5 V per cell. This prevents the battery

from deep discharge. CBI devices provide microprocessor controlled battery charging. Using algorithms, the battery’s condition will be detected and based on

that, an appropriate charging mode is chosen. The real-time diagnostics system will continuously monitor the charging progress and indicate possibly occurring

faults such as elements in short circuit, accidental reverse polarity connection or disconnection of the battery by the battery fault LED and a flashing code of the

diagnosis LED.

CBI All In One UPS Power Solutions are suitable for open/sealed lead acid-, lead gel- and optionally Ni-Cd batteries. By using the battery-select-jumper, it is

possible to set predefined charging curves for those battery types. The available charging options are recovery-, boost- and trickle charge. All CB devices are built

in a rugged metal case with a DIN rail mounting bracket.

**Features:**

* Power supply, battery charger, battery care module and backup module in one device

* Three charging modes

* Compact, rugged metal case

* Available in 12 VDC, 24 VDC and 48 VDC

* Suitable for most common battery types

* Adjustable charging current

* Easy battery diagnosis and fault identification either by LED or external devices connected to fault

* Status contacts

* High efficiency up to 91% through switching technology

* Several output protection features such as short circuit, overload, deep battery discharge etc.

* DIN rail mounting

* Small size

* 3-year warranty