锐单电子商城 , 一站式电子元器件采购平台!
  • 电话:400-990-0325

CAT1022LI-45-G

CAT1022LI-45-G

数据手册.pdf

监控电路,带有I2C串行2K位CMOS EEPROM ,手动复位及看门狗定时器 Supervisory Circuits with I2C Serial 2k-bit CMOS EEPROM, Manual Reset and Watchdog Timer

The CAT1022 is a complete memory and supervisory solution for microcontroller based systems. A 2 k-bit serial EEPROM memory and a system power supervisor with brown-out protection are integrated together in low power CMOS technology. Memory interface is via a 400 kHz I²C bus. output and does not have a Write Protect input. The supervisor has a 1.6 second watchdog timer circuit that resets a system to a known state if software or a hardware glitch halts or "hangs" the system. The watchdog timer monitors the SDA signal.The power supply monitor and reset circuit protect memory and system controllers during power up/down and against brownout conditions. Five reset threshold voltages support 5.0 V, 3.3 V and 3.0 V systems. If power supply voltages are out of tolerance reset signals become active, preventing the system microcontroller, ASIC or peripherals from operating. Reset signals become inactive typically 200 ms after the supply voltage exceeds the reset threshold level. With both active high and low reset signals, interface to microcontrollers and other ICs is simple. In addition, the , can be used as an input for push-button manual reset capability.The on-chip, 2 k-bit EEPROM memory features a 16-byte page. In addition, hardware data protection is provided by a V sense circuit that prevents writes to memory whenever V falls below the reset threshold or until V reaches the reset threshold during power up.Available packages include an 8-pin DIP, 8-pin SOIC, 8-pin TSSOP, 8-pin TDFN and 8-pin MSOP. The TDFN package thickness is 0.8 mm maximum. TDFN footprint options are 3x3 mm.

Features

---

 |

.
Precision power supply voltage monitor

\- 5.0 V, 3.3 V and 3.0 V systems

\- Five threshold voltage options

.
Watchdog timer
.
Active high or low reset

\- Valid reset guaranteed at VCC = 1 V

.
400 kHz I²C bus
.
3.0 V to 5.5 V operation
.
Low power CMOS technology
.
16-Byte page write buffer
.
Built-in inadvertent write protection
.
1,000,000 Program/Erase cycles
.
Manual reset input
.
100 year data retention
.
8-pin DIP, SOIC, TSSOP, MSOP or TDFN

3 x 3 mm foot-print packages

— TDFN max height is 0.8mm

.
Industrial and extended temperature ranges
CAT1022LI-45-G中文资料参数规格
技术参数

无卤素状态 Halogen Free

耗散功率 1000 mW

阈值电压 4.5 V

复位电压Min 4.5 V

复位电压Max 4.75 V

工作温度Max 85 ℃

工作温度Min -40 ℃

耗散功率Max 1000 mW

电源电压Max 5.5 V

电源电压Min 2.7 V

封装参数

安装方式 Through Hole

引脚数 8

封装 PDIP-8

外形尺寸

长度 9.27 mm

宽度 6.35 mm

高度 3.3 mm

封装 PDIP-8

物理参数

工作温度 -40℃ ~ 85℃ TA

其他

产品生命周期 Active

包装方式 Rail

制造应用 Mass storage, Printers, Medical systems, Industrial control

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

CAT1022LI-45-G引脚图与封装图
CAT1022LI-45-G引脚图

CAT1022LI-45-G引脚图

CAT1022LI-45-G封装图

CAT1022LI-45-G封装图

CAT1022LI-45-G封装焊盘图

CAT1022LI-45-G封装焊盘图

在线购买CAT1022LI-45-G
型号 制造商 描述 购买
CAT1022LI-45-G ON Semiconductor 安森美 监控电路,带有I2C串行2K位CMOS EEPROM ,手动复位及看门狗定时器 Supervisory Circuits with I2C Serial 2k-bit CMOS EEPROM, Manual Reset and Watchdog Timer 搜索库存