LM810M3-4.63
TI(德州仪器)
主动器件
TEXAS INSTRUMENTS LM810M3-4.63 精准监视器, 3V, 3.3V, 和5V电源电压, 高电平有效复位, 1.2V-5.5V输入, SOT-23-3
The is a 3-pin Microprocessor Supervisory Circuit with active-high RESET output. The supervisory circuit can be used to monitor the power supplies in microprocessor and digital systems. It provides a reset to the microprocessor during power-up, power-down and brownout conditions. The function of the LM809 is to monitor the VCC supply voltage and assert a reset signal whenever this voltage declines below the factory-programmed reset threshold. The reset signal remains asserted for 240ms after VCC rises above the threshold.
- .
- Power supply transient immunity
- .
- Fully specified over-temperature
- .
- Ensured RESET output valid for VCC >= 1V
- .
- Superior upgrade to MAX809 and MAX810
- .
- 140ms Minimum power-ON reset pulse width
- .
- 15µA Typical low supply current
