0022041101

2.50毫米（ 0.098 ）间距线对板KK®头，垂直，用摩擦斜坡， 10电路，锡（Sn ）镀层 2.50mm .098 Pitch Wire-to-Board KK® Header, Vertical, with Friction Ramp, 10 Circuits, Tin Sn Plating

Connector Header Through Hole 10 position 0.098" 2.50mm

得捷:
CONN HEADER VERT 10POS 2.5MM

艾睿:
Thanks to Molex&s;s wire to board 0022041101 header connector, you can reduce the possibility of accidentally shorting out any pins on your printed circuit. This HDR connector&s;s 10 contacts that are made out of brass and plated with tin over copper. It has a maximum voltage rating of 250 V. It has a straight body orientation. It has a header type gender. Its pitch is 2.5 mm. This is a 1-row connector. This device has a maximum current rating of 3 A/contact. This connector has an operating temperature of -40 to 105 °C. 0022041101 is housed in natural nylon 6/6. It uses the solder termination method. This product is 24.5 mm long, 11.7 mm tall and 4.9 mm deep.

Chip1Stop:
Conn Wire to Board HDR 10 POS 2.5mm Solder ST Thru-Hole Bag

Verical:
Conn Wire to Board HDR 10 POS 2.5mm Solder ST Top Entry Thru-Hole KK® Bag