PCA9539PWR

远程16位I2C和SMBus低功耗I / O扩展器，带有中断输出，复位和配置寄存器 REMOTE 16-BIT I2C AND SMBus LOW-POWER I/O EXPANDER WITH INTERRUPT OUTPUT, RESET, AND CONFIGURATION REGISTERS

Description

This 16-bit I/O expander for the two-line bidirectional bus I2C is designed for 2.3-V to 5.5-V VCC operation. It provides general-purpose remote I/O expansion for most microcontroller families via the I2C interface [serial clock SCL, serial data SDA].

The PCA9539 consists of two 8-bit Configuration input or output selection, Input Port, Output Port, and Polarity Inversion active-high or active-low operation registers. At power-on, the I/Os are configured as inputs. The system master can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each input or output is kept in the corresponding Input or output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.

Features

• Low Standby-Current Consumption of 1 μA Max

• I2C to Parallel Port Expander

• Open-Drain Active-Low Interrupt Output

• Active-Low Reset Input

• 5-V Tolerant I/O Ports

• Compatible With Most Microcontrollers

• 400-kHz Fast I2C Bus

• Polarity Inversion Register

• Address by Two Hardware Address Pins for Use of up to Four Devices

• Latched Outputs With High-Current Drive Capability for Directly Driving LEDs

• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II

• ESD Protection Exceeds JESD 22

   – 2000-V Human-Body Model A114-A

   – 1000-V Charged-Device Model C101