XTR110KPG4

TEXAS INSTRUMENTS  XTR110KPG4  信号调节器, 13.5 V, 40 V, DIP, 16 引脚, -25 °C

The is a Precision Voltage-to-current Converter/Transmitter designed for analogue signal transmission. It accepts inputs of 0 to 5V or 0 to 10V and can be connected for outputs of 4 to 20mA, 0 to 20mA, 5 to 25mA and many other commonly used ranges. A precision on-chip metal film resistor network provides input scaling and current offsetting. An internal 10V voltage reference can be used to drive external circuitry. Maximum power dissipation of QEXT depends on the power supply voltage and full-scale output current. The transistor type and heat sinking must be chosen according to the maximum power dissipation to prevent overheating.

.

4 to 20mA Transmitter

.

Selectable input/output ranges 0 to +5V, 0 to +10V inputs

.

0 to 20, 5 to 25mA outputs other ranges

.

0.005% Maximum nonlinearity, 14-bit

.

Precision +10V reference output

.

Single-supply operation

.

Green product and no Sb/Br

IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.