UCC28019EVM

TEXAS INSTRUMENTS UCC28019EVM Evaluation Board, 350W PFC Converter, Enhanced Dynamic Response, Fixed 65kHz Operation

The is an evaluation module for UCC28019, a 350W off line power factor correction PFC controller uses the boost topology operating in continuous conduction mode CCM. The controller is suitable for systems in the 100W to 2kW range over a wide range universal AC line input. Startup current during under voltage lockout is less than 200µA. The user can control low power standby mode by pulling the VSENSE pin below 0.77V. Low distortion wave shaping of the input current using average current mode control is achieved without input line sensing, reducing the component count. Simple external current and voltage loop compensation, along with advanced protection features, make this controller ideal for server and desktop power supplies, telecom rectifiers, and home electronics.

.

350W, 390V output

.

Universal off line input voltage range

.

Average current mode PWM control

.

Fixed 65KHz oscillator frequency

.

Cycle by cycle peak current limiting

.

VCC under voltage lockout

.

Voltage regulation open loop detection

.

Output under voltage protection

.

Output over voltage protection

.

AC input brown out protection

There are very high voltages present on the EVM. Some components will reach temperatures above 50°C. Precautions must be taken when handling the board. Never operate the EVM without the fan running.