锐单电子商城 , 一站式电子元器件采购平台!
  • 电话:400-990-0325

TPS65276VRHHT

TPS65276VRHHT

TI(德州仪器) 主动器件

具有 I2C 控制接口的 4.5V 至 18V 输入、双路(6A 和 3.5A)同步降压转换器 36-VQFN -40 to 125

TPS65276V is a monolithic dual synchronous buck converter with wide 4.5V to 18V operating input voltage range that encompassed most intermediate bus voltage operating off 5-, 9-, 12- or 15-V power bus or battery. The converter with constant frequency peak current mode control is designed to simplify its application while giving the designers options to optimize their usage according to the target applications.

Each buck converter in TPS65276V has external feedback resistors that can be used for setting the initial start up voltage. The feedback voltage reference for this start-up option is 0.6 V. Once the VID DAC is updated via the I2C, the buck converter switches feedback resistors from external to internal. The output voltage in each buck can be programmable from 0.68 V to 1.95 V in 10-mV steps with I2C Controlled 7-Bits VID.

Each buck converter in TPS65276V can also be I2C controlled for enabling/disabling output voltage, setting the pulse skipping mode and reading the power good status and die temperature warning.

The switching frequency of the converters can be set from 200 kHz to 1.6 MHz with an external resistor. Two converters have clock signal with 180° out-of-phase.

TPS65276V features dedicated enable pin when I2C interface is not used. Independent soft-start pin provides flexibility in power up programmability. Constant frequency peak current mode control simplifies the compensation and provides fast transient response. Cycle-by-cycle over current protection and hiccup mode operation limit MOSFET power dissipation in short circuit or over loading fault conditions. Low side reverse over current protection also prevents excessive sinking current from damaging the converter.

TPS65273V also features a light load pulse skipping mode PSM that can be controlled by I2C or MODE pin configuration. The PSM mode allows a power loss reduction on the input power supplied to the system to achieve high efficiency at light loading.

The TPS65273V is available in a 32-pin thermally enhanced HTSSOP DAP package and 36-pin QFN 6-mm × 6-mm RHH package.

TPS65276VRHHT中文资料参数规格
技术参数

输出接口数 2

输出电压 0.68V ~ 1.95V

输出电流 6A, 3.5A

静态电流 10.0 mA

调节输出数 2

开关频率 200kHz ~ 1600kHz

拓扑结构 Buck

输入电压Max 18 V

输入电压Min 4.5 V

输出电压Max 1.95 V

输出电压Min 0.68 V

工作温度Max 125 ℃

工作温度Min -40 ℃

输入电压 18 V

封装参数

安装方式 Surface Mount

引脚数 36

封装 VQFN

外形尺寸

封装 VQFN

物理参数

工作温度 -40℃ ~ 85℃ TA

其他

产品生命周期 Active

包装方式 Tape & Reel TR

符合标准

RoHS标准 RoHS Compliant

含铅标准 无铅

TPS65276VRHHT引脚图与封装图
TPS65276VRHHT引脚图

TPS65276VRHHT引脚图

TPS65276VRHHT封装图

TPS65276VRHHT封装图

TPS65276VRHHT封装焊盘图

TPS65276VRHHT封装焊盘图

在线购买TPS65276VRHHT
型号 制造商 描述 购买
TPS65276VRHHT TI 德州仪器 具有 I2C 控制接口的 4.5V 至 18V 输入、双路(6A 和 3.5A)同步降压转换器 36-VQFN -40 to 125 搜索库存
替代型号TPS65276VRHHT
图片 型号/品牌/封装 代替类型 描述 替代型号对比

型号: TPS65276VRHHT

品牌: TI 德州仪器

封装: HVQCCN

当前型号

具有 I2C 控制接口的 4.5V 至 18V 输入、双路(6A 和 3.5A)同步降压转换器 36-VQFN -40 to 125

当前型号

型号: TPS65276VRHHR

品牌: 德州仪器

封装: 36-VFQFN

类似代替

4.5 V至18 V的输入电压, 6 -A / 3.5 -A双同步降压转换器, I2C控制VID 4.5-V TO 18-V INPUT VOLTAGE, 6-A/3.5-A DUAL SYNCHRONOUS STEP-DOWN CONVERTER WITH I2C CONTROLLED VID

TPS65276VRHHT和TPS65276VRHHR的区别

型号: TPS65276VDAPR

品牌: 德州仪器

封装: 32-TSSOP

功能相似

4.5 V至18 V的输入电压, 6 -A / 3.5 -A双同步降压转换器, I2C控制VID 4.5-V TO 18-V INPUT VOLTAGE, 6-A/3.5-A DUAL SYNCHRONOUS STEP-DOWN CONVERTER WITH I2C CONTROLLED VID

TPS65276VRHHT和TPS65276VDAPR的区别