锐单电子商城 , 一站式电子元器件采购平台!
  • 电话:400-990-0325

TPS75933KTTR

TPS75933KTTR

TI(德州仪器) 主动器件

POWER GOOD快速瞬态响应7.5 -A低压差稳压器 POWER GOOD FAST-TRANSIENT RESPONSE 7.5-A LOW-DROPOUT VOLTAGE REGULATORS

The TPS759xx family of 7.5-A low dropout LDO regulators contains four fixed voltage option regulators with integrated power-good PG\ and an adjustable voltage option regulator. These devices are capable of supplying 7.5 A of output current with a dropout of 400 mV TPS75933. Therefore, the devices are capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 uA at full load and drops below 10 µA when the devices are disabled. The TPS759xx is designed to have fast transient response for large load current changes.

Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low typically 400 mV at an output current of 7.5 A for the TPS75933 and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading typically 125 µA over the full range of output current, 1 mA to 7.5 A. These two key specifications yield a significant improvement in operating life for battery-powered systems.

The device is enabled when EN\ is connected to a low-level voltage. This LDO family also features a sleep mode; applying a TTL high signal to EN\ enable shuts down the regulator, reducing the quiescent current to less than 1 µA at TJ = 25°C. The power-good terminal PG\ is an active low, open drain output, which can be used to implement a power-on reset or a low-battery indicator.

The TPS759xx is offered in 1.5-V, 1.8-V, 2.5-V, and 3.3-V fixed-voltage versions and in an adjustable version programmable over the range of 1.22 V to 5 V. Output voltage tolerance is specified as a maximum of 3% over line, load, and temperature ranges. The TPS759xx family is available in a 5-pin TO–220 KC and TO–263 KTT packages.

TPS75933KTTR中文资料参数规格
技术参数

输出接口数 1

输出电压 3.3 V

输出电流 7.5 A

供电电流 200 µA

静态电流 120 µA

输出电容类型 Tantalum

跌落电压 0.4V @7.5A

调节输出数 1

输入电压Max 5.5 V

输入电压Min 2.8 V

输出电压Min 3.3 V

输出电流Max 7.5 A

工作温度Max 125 ℃

工作温度Min -40 ℃

精度 ±3 %

输入电压 ≤5.5 V

封装参数

安装方式 Surface Mount

引脚数 6

封装 TO-263-6

外形尺寸

封装 TO-263-6

物理参数

工作温度 -40℃ ~ 125℃

其他

产品生命周期 Active

包装方式 Tape & Reel TR

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

TPS75933KTTR引脚图与封装图
TPS75933KTTR引脚图

TPS75933KTTR引脚图

TPS75933KTTR封装图

TPS75933KTTR封装图

TPS75933KTTR封装焊盘图

TPS75933KTTR封装焊盘图

在线购买TPS75933KTTR
型号 制造商 描述 购买
TPS75933KTTR TI 德州仪器 POWER GOOD快速瞬态响应7.5 -A低压差稳压器 POWER GOOD FAST-TRANSIENT RESPONSE 7.5-A LOW-DROPOUT VOLTAGE REGULATORS 搜索库存
替代型号TPS75933KTTR
图片 型号/品牌/封装 代替类型 描述 替代型号对比

型号: TPS75933KTTR

品牌: TI 德州仪器

封装: TO-263 7.5A 5Pin

当前型号

POWER GOOD快速瞬态响应7.5 -A低压差稳压器 POWER GOOD FAST-TRANSIENT RESPONSE 7.5-A LOW-DROPOUT VOLTAGE REGULATORS

当前型号

型号: TPS75933KTTRG3

品牌: 德州仪器

封装: TO-263 7.5A 5Pin

完全替代

POWER GOOD快速瞬态响应7.5 -A低压差稳压器 POWER GOOD FAST-TRANSIENT RESPONSE 7.5-A LOW-DROPOUT VOLTAGE REGULATORS

TPS75933KTTR和TPS75933KTTRG3的区别

型号: TPS75933KTTT

品牌: 德州仪器

封装: TO-263 7.5A 5Pin

类似代替

LDO(低压降)线性电压调节器,7.5A,Texas Instruments### LDO(低压降)线性电压调节器,Texas Instruments低压降或 LDO 为线性电压稳压器。 我们有多种系列的线性稳压器。 LDO 稳压器可在输入 - 输出差分电压较小时运行。 LDO 电压稳压器可提供快速瞬态响应、宽输入电压范围、低静态电流、低噪声、高 PSRR。

TPS75933KTTR和TPS75933KTTT的区别

型号: TPS75933KTTTG3

品牌: 德州仪器

封装: TO-263 7.5A 5Pin

类似代替

POWER GOOD快速瞬态响应7.5 -A低压差稳压器 POWER GOOD FAST-TRANSIENT RESPONSE 7.5-A LOW-DROPOUT VOLTAGE REGULATORS

TPS75933KTTR和TPS75933KTTTG3的区别