TPS61006DGSR
单及其与启动，并进入满载两节升压转换器 SINGLE- AND DUAL-CELL BOOST CONVERTER WITH START-UP INTO FULL LOAD
升压 开关稳压器 IC 正 固定 3.3V 1 输出 1.3A（开关） 10-TFSOP，10-MSOP（0.118"，3.00mm 宽）
得捷:
IC REG BOOST 3.3V 1.3A 10VSSOP
立创商城:
升压型 Vin=0.8V~3.3V Vout=3.3V 1.3A
德州仪器TI:
Low input voltage non-synchronous boost converter with fixed 3.3-V output
贸泽:
Switching Voltage Regulators Lo-In Voltage Boost Converter
艾睿:
Adjust the voltage level of your devices with this step up TPS61006DGSR DC to DC converter from Texas Instruments. This converter&s;s single output can produce a current up to 0.2 A. Supply your circuit with sufficient power by implementing this, which requires a minimum input voltage of 0.8 V that does not exceed 3.3 V. With a fixed output that has a voltage of 3.3 V, this is power management at its best. This converter is 90 % efficient. By operating at a load regulation of 0.25%Typ and line regulation of 0.3%/VTyp you can provide a constant voltage at your output. It has a switching frequency of 840 kHz. This product will be shipped in tape and reel packaging to allow for quick mounting and safe delivery. This converter has an operating temperature range of -40 °C to 85 °C.
安富利:
Conv DC-DC Single Step Up 0.8V to 3.3V 10-Pin VSSOP T/R
Chip1Stop:
Step-Up Regulator Low Input Voltage Boost Converter with Fixed 3.3V Output Conv DC-DC Single Step Up 0.8V to 3.3V 10-Pin VSSOP T/R
Verical:
Conv DC-DC 0.8V to 3.3V Step Up Single-Out 3.3V 0.2A 10-Pin VSSOP T/R
Win Source:
Boost Switching Regulator IC Positive Fixed 3.3V 1 Output 1.3A Switch 10-TFSOP, 10-MSOP 0.118", 3.00mm Width
