TPS63030DSKT
TEXAS INSTRUMENTS TPS63030DSKT 直流-直流开关降压-升压稳压器, 可调, 1.8V-5.5V输入, 1.2V-5.5V输出, 1A输出, SON-10
降压/升压直流/直流转换器（集成开关），Texas Instruments
此高效降压/升压转换器使用单个电感器，用于直流到直流转换。 可在降压和升压功能之间进行自动传输，可在使用两节和三节碱性电池、镍镉或镍氢、单节锂电池的电池供电产品中采用降压/升压转换器。 这使其特别适合与手机和类似手持式设备一起使用。
立创商城:
TPS63030DSKT
得捷:
IC REG BCK BST ADJ 900MA 10SON
德州仪器TI:
High Efficient Single Inductor Buck-Boost Converter with 1-A Switches
欧时:
### 降压/升压直流/直流转换器（集成开关），Texas Instruments此高效降压/升压转换器使用单个电感器，用于直流到直流转换。 可在降压和升压功能之间进行自动传输，可在使用两节和三节碱性电池、镍镉或镍氢、单节锂电池的电池供电产品中采用降压/升压转换器。 这使其特别适合与手机和类似手持式设备一起使用。### 直流/直流开关调节器转换器（集成开关），Texas InstrumentsTexas Instruments 的此系列高度集成的高效开关稳压器包括步升（升压）、步降（降压）、步升/降（增压/降压）和反相类型，为每个直流稳压器应用提供高效的解决方案。
e络盟:
TEXAS INSTRUMENTS TPS63030DSKT. 芯片, 开关稳压器, 升压-降压式, 5.5V, 0.8A
艾睿:
Adjust the voltage level of your devices with this non-inverting and inverting|step up|step down TPS63030DSKT DC to DC converter from Texas Instruments. This converter&s;s single output can produce a current up to 0.8 A. By only needing an input voltage of 1.8 V with a maximum of 5.5 V, this is the best way to control the power in your circuit. With an adjustable output that has a voltage of 1.2 to 5.5 V, this is power management at its best. This converter is 96typ % efficient. Users like the load regulation of 0.5% and line regulation of 0.5%. It has a switching frequency of 2400 kHz. This component will be shipped in tape and reel packaging to allow for effective mounting and safe delivery. This converter has an operating temperature range of -40 °C to 85 °C.
安富利:
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to 2.5V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation PWM controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 10-pin QFN PowerPAD package measuring 2.5mm × 2.5 mm DSK.
Chip1Stop:
Buck-Boost Regulator High Efficient Single Inductor Buck-Boost Converter with 1-A Switches Conv DC-DC 1.8V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 1.2V to 5.5V 0.8A 10-Pin WSON EP T/R
Verical:
Conv DC-DC 1.8V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 1.2V to 5.5V 0.8A 10-Pin WSON EP T/R
Newark:
# TEXAS INSTRUMENTS TPS63030DSKT DC-DC Switching Buck-Boost Regulator, Adjustable, 1.8V-5.5Vin, 1.2V-5.5Vout, 0.8Aout, SON-10
Win Source:
Buck-Boost Switching Regulator IC Positive Adjustable 1.2V 1 Output 900mA Switch 10-WFDFN Exposed Pad
DeviceMart:
IC REG BUCK BOOST SYNC ADJ 10SON
