TUSB8040PFP
USB 3.0四端口集线器 USB 3.0 Four Port Hub
Introduction
The TUSB8040 is USB 3.0 compliant hub available in an 80-pin QFP package. The device is designed for operation over the commercial temperature range of 0°C to 70°C.
Features
• USB 3.0 Compliant Four Port Hub, D# 330000003
– Upstream Port Supports SuperSpeed, High-Speed and Full-Speed Connections
– Each of the Four Downstream Ports Support SuperSpeed, High-Speed, Full-Speed/Low-Speed Connections
• USB 2.0 Hub Features
– Multi Transaction Translator MTT Hub: Four Transaction Translators, One Per Port
– Four Over USB Required Minimum of Two Asynchronous Endpoint Buffers Per Transaction Translator for Better Throughput
• Supports Charging Downstream Port CDP Applications
– Battery Charging 1.2 Compliant
• Supports Operation as a USB 3.0 or USB 2.0 Compound Device
• Supports Per Port or Ganged Power Switching and Over-Current Protection
• Provides the following status outputs:
– High-Speed Upstream Connection
– High-Speed Upstream Port Suspended
– SuperSpeed Upstream Connection
– SuperSpeed Upstream Port Suspended
• Optional Serial EEPROM or SMBus Slave Interface for Custom Configurations:
– VID/PID
– Manufacturer and Product Strings
– Serial Number
• Using Pin Selection or the EEPROM/SMBus Slave Interface, Each Downstream Port Can Be Independently:
– Enabled or Disabled
– Marked as Removable or Permanently Attached for Compound Applications
– Have Battery Charging Enabled or Disabled
• Provides 128-Bit Universally Unique Identifier UUID
• Optionally Supports USB 2.0 Compliant Port Indicator LEDs
• Configurable SMBus Address to Support Multiple Devices on the Same SMBus Segment
• Supports On-Board and In-System EEPROM Programming Via the USB 2.0 Upstream Port
• Single Clock Input, 24-MHz Crystal or Oscillator
• No Special Driver Requirements; Works Seamlessly With Any Operating System With USB Stack Support