TMS5702125DZWTQQ1

MCU 16Bit/32Bit Hercules TMS570 ARM Cortex R4F RISC 2048KB Flash 1.2V/3.3V 337Pin NFBGA

Description

The TMS570LSxxx5 is a high performance automotive grade microcontroller family for safety systems. The safety architecture includes Dual CPUs in lockstep, CPU and Memory Built-In Self Test BIST logic, ECC on both the Flash and the data SRAM, parity on peripheral memories, and loop back capability on peripheral IOs.

TMS570LSxxx5 16/32-Bit RISC Flash Microcontroller

Features

• High-Performance Automotive Grade Microcontroller for Safety Critical Applications

– Dual CPU’ s running in lockstep

– ECC on flash and RAM interfaces

– Built-In Self Test for CPU and on-chip RAMs

– Error Signaling Module with Error Pin

– Voltage and Clock Monitoring

• ARM® Cortex™ – R4F 32-bit RISC CPU

– Efficient 1.6DMIPS/MHz with 8-stage pipeline

– Floating-Point Unit with Single/Double Precision

– 12-Region Memory Protection Unit

– Open Architecture with 3rd Party Support

• Operating Conditions

– Up to 180MHz System Clock

– Core Supply Voltage VCC: 1.2V nominal

– I/O Supply Voltage VCCIO: 3.3V nominal

• Integrated Memory

– Up to 3MB Program Flash with ECC

– Up to 256KB RAM with ECC

– 64KB Flash for emulated EEPROM

• 16- bit External Memory Interface

• Common Platform Architecture

– Consistent memory map across family

– Real-Time Interrupt Timer R OS Timer

– 96-channel Vectored Interrupt Module VIM

– 2-channel Cyclic Redundancy Checker CRC

• Direct Memory Access DMA Controller

– 16 Channels and 32 Control Packets

– Parity protection for control packet RAM

– DMA Accesses Protected by Dedicated MPU

• Frequency-Modulated Phase-Locked-Loop FMPLL with Built-In Slip Detector

• Separate Non-Modulating PLL for FlexRay

• IEEE 1149.1 JTAG, Boundary Scan and ARM CoreSight Components

• JTAG Security Module

• Trace and Calibration Capabilities

– Embedded Trace Macrocell ETM-R4

– Data Modification Module DMM

– RAM Trace Port RTP

– Parameter Overlay Module POM

• Multiple Communication Interfaces

– FlexRay Controller with 2 channels

• 8KB message RAM with parity protection

• Dedicated Transfer Unit FTU

– Three CAN Controllers DCAN

• 64 mailboxes with parity protection each

• Compliant to CAN protocol version 2.0B

– Inter-Integrated Circuit I2C

– Three Multi-buffered Serial Peripheral Interfaces MibSPI

• 128 Words with Parity Protection each

– Two Standard Serial Peripheral Interfaces SPI

– Local Interconnect Network Interface LIN Controller

• Compliant to LIN protocol version 2.1

– Standard Serial Communication Interface SCI

• Two High-End Timer Modules N2HET

– N2HET1: 32 programmable channels

– N2HET2: 20 programmable channels

– 160 Word Instruction RAM with parity protection each

– Each includes Hardware Angle Generator

– Dedicated Transfer Unit for each N2HET HTU

• Two 10/12-bit Multi-Buffered ADC Modules

– ADC1: 24 channels

– ADC2: 16 channels

– 16 shared channels

– 64 result buffers with parity protection each

• Packages

– 144-pin Quad Flatpack PGE [Green]

– 337-Ball Grid Array ZWT [Green]

Applications

• Braking systems ABS and ESC

• Electric power steering EPS

• HEV/EV inverter systems

• Battery management systems

• Active driver assistance systems

• Aerospace and avionics

• Railway communications

• Off road vehicles