TLK110PTR
TEXAS INSTRUMENTS TLK110PTR 以太网控制器, 100 Mbps, IEEE 802.3, IEEE 802.3u, 3 V, 3.6 V, LQFP, 48 引脚
The is a single-port Ethernet Physical-layer Transceiver for 10Base-T and 100Base-TX signalling. This device integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. The TLK110 supports the standard Media Independent Interface MII and Reduced Media Independent Interface RMII for direct connection to a Media Access Controller MAC. The TLK110 is designed for power-supply flexibility and can operate with a single 3.3V power supply or with combinations of 3.3V and 1.55V power supplies for reduced power operation. The TLK110 uses mixed-signal processing to perform equalization, data recovery and error correction to achieve robust operation over CAT 5 twisted-pair wiring. This device not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross-talk and alien noise. The TLK110 Ethernet PHY has a special Power Back Off mode to conserve power in systems with relatively short cables.
- .
- Low power consumption
- .
- Programmable power back off to reduce PHY power up to 20% in systems with shorter cables
- .
- Low deterministic latency supports IEEE1588 implementation
- .
- Cable diagnostics
- .
- Programmable fast link down modes
- .
- Energy detection mode
- .
- Error-free 100Base-T operation up to 150m under typical conditions
- .
- Error-free 10Base-T operation up to 300m under typical conditions
- .
- IEEE 1149.1 JTAG
- .
- Sublayer with adaptive equalization and baseline wander compensation
- .
- Green product and no Sb/Br