锐单电子商城 , 一站式电子元器件采购平台!
  • 电话:400-990-0325

TPIC2810DG4

TPIC2810DG4

TI(德州仪器) 主动器件

芯片, 发光二极管驱动器, 低电流, SOIC-16

The TPIC2810 device is a monolithic, medium-voltage, low-current, 8-bit shift register design to drive low-side switched resistive loads such as LEDs. The device is not recommended for switching inductive loads.

This device contains an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Data transfers through the shift register via an I2C bus interface. Data is transferred into the data shift register only after the group ID and device address have been verified. The subaddress directs the I2C bus interface to read or write data to the device or transfer data to the output. When output enable G\ is held high, all drain outputs are off. When G\ is held low, data from the output storage register is transparent to the output buffers. When data in the output buffers is low, the DMOS transistor outputs are off. When data is high, the DMOS transistor outputs have sink-current capability.

The TPIC2810 device has an internal power-up clear to initialize all registers to an off state when power is applied to the device. It also has a thermal sensor to monitor the die temperature and shut the drain outputs off, if an over current condition occurs.

Outputs are low-side, open-drain DMOS transistors with output ratings of 40 V and 100 mA continuous sink-current capability. Each output provides a 210-mA maximum current limit at TC = 25°C. The current limit decreases as the junction temperature increases for additional device protection. The device also provides up to 3000 V of ESD protection on output terminals and 2000 V of ESD protection on input terminals when tested using the human-body model.

The TPIC2810 device is characterized for operation over the operating case temperature range of –40°C to 125°C.

TPIC2810DG4中文资料参数规格
技术参数

频率 2 MHz

电源电压DC 5.50V max

输出接口数 8

输入电压DC 3.00V ~ 5.50V

输出电压 40 V

输出电流 210 mA

供电电流 1000 mA

针脚数 16

耗散功率 1087 W

开关频率 2 MHz

输入电压Max 5.5 V

输入电压Min 3 V

工作温度Max 125 ℃

工作温度Min -40 ℃

耗散功率Max 1087 mW

电源电压 3V ~ 5.5V

封装参数

安装方式 Surface Mount

引脚数 16

封装 SOIC-16

外形尺寸

封装 SOIC-16

物理参数

工作温度 -40℃ ~ 150℃ TJ

其他

产品生命周期 Active

包装方式 Tube

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

REACH SVHC版本 2015/06/15

海关信息

ECCN代码 EAR99

TPIC2810DG4引脚图与封装图
TPIC2810DG4引脚图

TPIC2810DG4引脚图

TPIC2810DG4封装图

TPIC2810DG4封装图

TPIC2810DG4封装焊盘图

TPIC2810DG4封装焊盘图

在线购买TPIC2810DG4
型号 制造商 描述 购买
TPIC2810DG4 TI 德州仪器 芯片, 发光二极管驱动器, 低电流, SOIC-16 搜索库存
替代型号TPIC2810DG4
图片 型号/品牌/封装 代替类型 描述 替代型号对比

型号: TPIC2810DG4

品牌: TI 德州仪器

封装: SOIC 3V to 5.5V 210mA 8Output

当前型号

芯片, 发光二极管驱动器, 低电流, SOIC-16

当前型号

型号: TPIC2810D

品牌: 德州仪器

封装: SOIC 3V to 5.5V 210mA 8Output

完全替代

TEXAS INSTRUMENTS  TPIC2810D.  发光二极管驱动器, 8输出, I2C, 3V-5.5V输入, 2MHz开关, 40V/210mA输出, SOIC-16

TPIC2810DG4和TPIC2810D的区别

型号: TPIC2810DR

品牌: 德州仪器

封装: SOIC

完全替代

配备 I2C 接口的 8 位 LED 驱动器 16-SOIC -40 to 125

TPIC2810DG4和TPIC2810DR的区别

型号: TPIC2810DRG4

品牌: 德州仪器

封装: SOIC

类似代替

配备 I2C 接口的 8 位 LED 驱动器 16-SOIC

TPIC2810DG4和TPIC2810DRG4的区别