TVP5147M1PFP
TEXAS INSTRUMENTS TVP5147M1PFP 芯片, 数字视频解码器, 80-HTQFP
The is a high-quality, single-chip Digital Video Decoder that digitizes and decodes all popular baseband analog video formats into digital component video. The TVP5147M1 decoder supports the analog-to-digital conversion of component YPbPr signals, as well as the A/D conversion and decoding of NTSC, PAL and SECAM composite and S-video into component YCbCr. This decoder includes two 11-bit 30MSPS analog-to-digital converters ADCs. Preceding each ADC in the device, the corresponding analog channel contains an analog circuit that clamps the input to a reference voltage and applies a programmable gain and offset. A total of ten video input terminals can be configured to a combination of YPbPr, CVBS or S-video video inputs.
- .
- Robust sync detection for weak and noisy signals as well as VCR trick modes
- .
- Y/C separation by 2-D, 5-line, adaptive comb or chroma trap filter
- .
- Two 11-bit, 30MSPS ADC with analog preprocessors
- .
- Clock/timing processor and power-down control
- .
- Software-controlled power-saving standby mode
- .
- Output formatter
- .
- I²C host port interface
- .
- VBI data processor
- .
- Macrovision copy protection detection circuit Type 1, 2, 3 and separate colour stripe detection
- .
- 3.3V Tolerant digital I/O ports
- .
- Two 30MSPS 11-bit A/D channels with video encoder synchronization programmable gain control
- .
- Supports NTSC J, M, 4.43, PAL B, D, G, H, I, M, N, Nc, 60 and SECAM B, D, G, K, K1, L
- .
- Supports CVBS and S-video
- .
- Supports analog component YPbPr video format with embedded sync
- .
- Ten analog video input terminals for multisource connection
- .
- Supports analog video output
- .
- User-programmable video output formats
- .
- HSYNC/VSYNC outputs with programmable position, polarity, width and field ID FID output
- .
- Composite and S-video processing
- .
- Certified Macrovision™ copy protection detection