TMS320VC33PGE120G4

数字信号处理器 DIGITAL SIGNAL PROCESSOR

description

The TMS320VC33 DSP is a 32-bit, floating-point processor manufactured in 0.18-µm four-level-metal CMOSmeline technology. The TMS320VC33 is part of the TMS320C3x generation of DSPs from Texas

Instruments.

High-Performance Floating-Point Digital Signal Processor DSP:

  − TMS320VC33-150

    − 13-ns Instruction Cycle Time

    − 150 Million Floating-Point Operations Per Second MFLOPS

    − 75 Million Instructions Per SecondMIPS

  − TMS320VC33-120

    − 17-ns Instruction Cycle Time

    − 120 MFLOPS

    − 60 MIPS

34K ×32-Bit 1.1-Mbit On-Chip Words of Dual-Access Static Random-Access Memory SRAM Configured in 2 ×16K Plus 2 ×1K Blocks to Improve Internal Performance

x5 Phase-Locked Loop PLL Clock Generator

Very Low Power: < 200 mW @ 150 MFLOPS

32-Bit High-Performance CPU

16- /32-Bit Integer and 32- /40-Bit Floating-Point Operations

Four Internally Decoded Page Strobes to Simplify Interface to I/O and Memory Devices

Boot-Program Loader

EDGEMODE Selectable External Interrupts

32-Bit Instruction Word, 24-Bit Addresses

Eight Extended-Precision Registers

On-Chip Memory-Mapped Peripherals:

  − One Serial Port

  − Two 32-Bit Timers

  − Direct Memory Access DMA Coprocessor for Concurrent I/O and CPU Operation

Fabricated Using the 0.18-µm leff-Effective Gate Length TImelineProcess Technology by Texas Instruments TI

144-Pin Low-Profile Quad Flatpack LQFP PGE Suffix

Two Address Generators With Eight Auxiliary Registers and Two Auxiliary Register Arithmetic UnitsARAUs

Two Low-Power Modes

Two- and Three-Operand Instructions

Parallel Arithmetic/Logic Unit ALU and Multiplier Execution in a Single Cycle

Block-Repeat Capability

Zero-Overhead Loops With Single-Cycle Branches

Conditional Calls and Returns

Interlocked Instructions for Multiprocessing Support

Bus-Control Registers Configure Strobe-Control Wait-State Generation

1.8-V Core and 3.3-V I/O Supply Voltages

On-Chip Scan-Based Emulation Logic, IEEE Std 1149.1†JTAG