STK672-040-E

ON SEMICONDUCTOR  STK672-040-E  芯片, 驱动器, 步进电机, 45V输入, 1.5A

The is a stepping motor driver Hybrid IC uses power MOSFETs in the output stage. It includes a built-in microstepping controller and is based on unipolar constant-current PWM system. It supports application simplification and standardization by providing a built-in 4-phase distribution stepping motor controller. It supports five excitation methods of 2-phase, 1 to 2 phase, 1W 2 phase, 2W 1 to 2 phase and 4W 1 to 2-phase excitations and can provide control of the basic stepping angle of the stepping motor divided into 1/16 step units. It also allows the motor speed to be controlled with only a clock signal. The use of this hybrid IC allows designers to implement systems that provide high motor torques, low vibration levels, low noise, fast response and high-efficiency drive.

.

Phase retention even if excitation is switched

.

Excitation phase state can be verified in real time using the MO1, MO2 and MOI signal output pins

.

External excitation PWM drive allows a wide operating supply voltage range to be used

.

Current detection resistor 0.33R built-in the hybrid IC itself

.

Power MOSFETs adopted for low drive loss

.

Provides a motor output drive current of IOH=1.5A

.

12W Allowable power dissipation