SN74AHC574DGVR

八路边沿触发D型触发器具有​​三态输出 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

* Operating Range 2-V to 5.5-V VCC * 3-State Outputs Drive Bus Lines Directly * Latch-Up Performance Exceeds 250 mA Per JESD 17 * ESD Protection Exceeds JESD 22 * 2000-V Human-Body Model * 200-V Machine Model * 1000-V Charged-Device Model

得捷:
IC FF D-TYPE SNGL 8BIT 20TVSOP

立创商城:
SN74AHC574DGVR

德州仪器TI:
Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs

艾睿:
Store state information for later use by using the Texas Instruments SN74AHC574DGVR flip flop device. It has a single-ended output signal. With a 3-state output, this is power management at its best. This flip flop has a minimum operating temperature of -40 °C and a maximum of 125 °C. In order to ensure safe delivery and enable quick mounting of this component after delivery, it will be encased in tape and reel packaging during shipment. This non-inverting device has a typical operating supply voltage of 2.5|3.3|5 V. Its minimum operating supply voltage of 2 V, while its maximum is 5.5 V. It has 8 channels per chip.

安富利:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin TVSOP T/R

Chip1Stop:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin TVSOP T/R

Verical:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin TVSOP T/R

Win Source:
IC FF D-TYPE SNGL 8BIT 20TVSOP / Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-TFSOP 0.173", 4.40mm Width