SN74AHC16541DL
TI(德州仪器)
电子元器件分类
16位缓冲器/驱动器，具有三态输出 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
The is a non-inverting 16-bit Buffer composed of two 8-bit sections with separate output-enable signals. For either 8-bit buffer section, the two output-enable inputs must be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 8-bit buffer section are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.
- .
- EPIC™ Enhanced-Performance Implanted CMOS process
- .
- Distributed VCC and GND pins minimize high-speed switching noise
- .
- Flow-through architecture optimizes PCB layout
- .
- Latch-up performance exceeds 250mA per JESD 17
- .
- Green product and no Sb/Br
