SN65LVDS116DGGR

16端口LVDS转发器 16-PORT LVDS REPEATER

DESCRIPON

The SN65LVDS116 is one differential line receiver connected to sixteen differential line drivers that

implement the electrical characteristics of low-voltage differential signaling LVDS. LVDS, as specified in

EIA/TIA-644, is a data signaling technique that offers the low-power, low-noise coupling, and fast switching speeds to transmit data at relatively long distances. Note: The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other system characteristics.

FEATURES

• One Receiver and Sixteen Line Drivers Meet or Exceed the Requirements of ANSI EIA/TIA-644 Standard

• Typical Data Signaling Rates to 400 Mbps or Clock Frequencies to 400 MHz

• Enabling Logic Allows Separate Control of Each Bank of Four Channels or 2-Bit Selection of Any One of the Four Banks

• Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and a 100-Ω Load

• Electrically Compatible With LVDS, PECL, LVPECL, LVTTL, LVCMOS, GTL, BTL, CTT, SSTL, or HSTL Outputs With External Termination Networks

• Propagation Delay Times < 4.7 ns

• Output Skew Is < 300 ps and Part-to-Part Skew < 1.5 ns

• Total Power Dissipation Typically 470 mW With All Ports Enabled and at 200 MHz

• Driver Outputs or Receiver Input Is High Impedance When Disabled or With VCC < 1.5V

• Bus-Pin ESD Protection Exceeds 12 kV

• Packaged in Thin Shrink Small-Outline Package With 20-Mil Terminal Pitch