SN65HVD1470D

RS485收发器RS422, 3V-3.6V电源, 1驱动器, SOIC-14

The is a Full-duplex Transceiver features the highest ESD protection in the RS-485 portfolio, supporting ±16kV IEC61000-4-2 contact discharge and >±30kV HBM ESD protection. This RS-485 transceiver has robust 3.3V driver and receiver. The large receiver hysteresis of the SN65HVD147x device provides immunity to conducted differential noise and the wide operating temperature enables reliability in harsh operating environments. This device each combines a differential driver and a differential receiver, which operate from a single 3.3V power supply. Each driver and receiver has separate input and output pins for full-duplex bus communication designs. This device all features a wide common-mode voltage range which makes the devices suitable for multi-point applications over long cable runs. It has active-high driver enables and active-low receiver enables. A low, less than 5µA standby current can be achieved by disabling both the driver and receiver.

.

Large receiver hysteresis 70mV for noise rejection

.

Glitch-free power-up and power-down protection for hot-plugging applications

.

<1.1mA Quiescent current during operation

.

10nA typical and <5µA maximum Low standby supply current

.

Green product and no Sb/Br