SN65HVDA100QDRQ1

TEXAS INSTRUMENTS  SN65HVDA100QDRQ1  芯片, 本地内网接口, AEC-Q100, SOIC-8

The is a Local Interconnect Network LIN Physical Interface integrates the serial transceiver with wakeup and protection features. The LIN bus is a single-wire bidirectional bus typically used for low-speed in-vehicle networks using data rates from 2.4 to 20kbps. The LIN protocol output data stream on TXD is converted by the SN65HVDA100 into the LIN bus signal through a current-limited wave-shaping driver as outlined by the LIN physical layer specification. The receiver converts the data stream from the LIN bus and outputs the data stream through RXD. The LIN bus has two states: dominant state voltage near ground and recessive state voltage near battery. In the recessive state, the LIN bus is pulled high by the internal pullup resistor 30kR and series diode, so no external pullup components are required for slave applications. Master applications require an external pullup resistor 1kR plus a series diode per the LIN specification.

.

Local interconnect network LIN physical layer

.

Specification revision 2.1 compliant and conforms to SAEJ2602 recommended practice for LIN

.

LIN Transmit speed up to 20kbps LIN specified

.

Maximum, high-speed receive capable

.

Ultra-low current consumption

.

Allows wake-up events

.

High electromagnetic compatibility EMC

.

Control of external voltage regulator INH pin

.

Supports ISO9141 K-Line -like functions

.

Prevention of false wakeups with bus stuck

.

Dominant fault

.

Thermal shutdown

.

Unpowered node or ground disconnection failsafe at system level, node does not disturb bus

.

Green product and no Sb/Br

Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.