SN75C189AD
TEXAS INSTRUMENTS SN75C189AD 线路接收器, RS232, 4驱动器, 4.5V-6电源, SOIC-14
The is a quadruple low-power Line Receiver used to interface data terminal equipment DTE with data circuit-terminating equipment DCE. This device has been designed to conform to A/EIA-232-F. Each receiver has provision for adjustment of the overall input threshold levels. This is achieved by choosing external series resistors and voltages to provide bias levels for the response-control pins. The output is in the high logic state if the input is open circuit or shorted to ground. This device has an on-chip filter that rejects input pulses of less than 1µs duration. An external capacitor can be connected from the control pins to ground to provide further input noise filtering for each receiver. It has been designed using low-power techniques in a bipolar technology. In most applications, this receiver interface to single inputs of peripheral devices such as UARTs, ACEs or microprocessors.
- .
- Preset on-chip input noise filter
- .
- Built-in input hysteresis
- .
- Response and threshold control inputs
- .
- Push-pull outputs
- .
- 420µA Typical low supply current
- .
- 0.97V Typical hysteresis
- .
- Green product and no Sb/Br