SN74VMEH22501ADGGR
TEXAS INSTRUMENTS SN74VMEH22501ADGGR 芯片, 总线收发器
The is a 8-bit Universal Bus Transceiver has two integral 1-bit three-wire bus transceivers and is designed for 3.3V VCC operation with 5V tolerant inputs. The UBT™ transceiver allows transparent, latched and flip-flop modes of data transfer and the separate LVTTL input and outputs on the bus transceiver provides a feedback path for control and diagnostics monitoring. This device provides a high-speed interface between cards operating at LVTTL logic levels and VME64, VME64x or VME320 backplane topologies. high-speed backplane operation is a direct result of the improved OEC™ circuitry and high drive that has been designed and tested into the VME64x backplane model. The B-port I/Os are optimized for driving large capacitive loads and include pseudo-ETL input thresholds 1/2 VCC ±50mV for increased noise immunity. These specifications support the 2eVME protocols in VME64x ANSI/VITA 1.1 and 2eSST protocols in VITA 1.5.
- .
- Member of the Texas Instruments Widebus™ family
- .
- UBT™ Transceiver combines D-type latches and D-type flip-flops
- .
- OEC™ Circuitry improves signal integrity and reduces electromagnetic interference EMI
- .
- Ioff, Power-up 3-state and BIAS VCC support live insertion
- .
- Bus hold on 3A-port data inputs
- .
- 26R Equivalent series resistor on 3A ports and Y outputs
- .
- Flow-through architecture facilitates printed circuit board layout
- .
- Distributed VCC and GND pins minimize high-speed switching noise
- .
- Latch-up performance exceeds 100mA per JESD 78, Class II
- .
- Green product and no Sb/Br