SN65HVD233SJD
3.3 -V CAN收发器 3.3-V CAN TRANSCEIVER
Description
The SN65HVD233 is used in applications employing the controller area network CAN serial
communication physical layer in accordance with the ISO 11898 standard, with the exception that the thermal shutdown is removed. As a CAN transceiver, the device provides transmit and receive capability between the differential CAN bus and a CAN controller, with signaling rates up to 1 Mbps.
Designed for operation in especially harsh environments, the device features cross wire, overvoltage, and loss-of-ground protection to ±36 V, with common-mode transient protection of ±100 V. This device operates over a –7-V to 12-V common-mode range with a maximum of 60 nodes on a bus.
Features
• Bus-Pin Fault Protection Exceeds ±36 V
• Bus-Pin ESD Protection Exceeds 16-kV Human Body Model HBM
• Compatible With ISO 11898
• Signaling Rates1 up to 1 Mbps
• Extended –7-V to 12-V Common-Mode Range
• High-Input Impedance Allows for 120 Nodes
• LVTTL I/Os Are 5-V Tolerant
• Adjustable Driver Transition Times for Improved Signal Quality
• Unpowered Node Does Not Disturb the Bus
• Low-Current Standby Mode: 200 µA Typical
• Power-Up and Power-Down Glitch-Free Bus Inputs and Outputs
– High-Input Impedance With Low VCC
– Monolithic Output During Power Cycling
• Loopback for Diagnostic Functions Available
• DeviceNet™ Vendor ID #8061
The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps bits per second.
Applications
• Down-Hole Drilling
• High-Temperature Environments
• Industrial Automation
– DeviceNet Data Buses
– Smart Distributed Systems SDS™
• SAE J1939 Data Bus Interfaces
• NMEA 2000 Data Bus Interfaces
• ISO 11783 Data Bus Interfaces
• CAN Data Bus Interfaces
• Controlled Baseline
• One Assembly or Test Site
• One Fabrication Site
• Available in Extreme –55°C to 210°C Temperature Range1
• Extended Product Life Cycle
• Extended Product-Change Notification
• Product Traceability
