OPA2316QDGKRQ1

运算放大器, RRIO, 2个放大器, 10 MHz, 6 V/µs, 1.8V 至 5.5V, ± 900mV 至 ± 2.75V, VSSOP, 8 引脚

The OPAx316-Q1 family of single and dual operational amplifiers represents a new generation of general-purpose, low-power operational amplifiers. Featuring rail-to-rail input and output swings, low quiescent current 400 µA/ch typical combined with a wide bandwidth of 10 MHz and very-low noise 11 nV/√Hz at 1 kHz makes this family suitable for circuits requiring a good speed and power ratio. The low input bias current supports those operational amplifiers for applications with megaohm source impedances. The low input bias current of the OPAx316-Q1 yields a very-low current noise to make the device attractive for high impedance sensor interfaces.

The robust design of the OPAx316-Q1 provides ease-of-use to the circuit designer: a unity-gain stable, integrated RFI and EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge ESD protection 4-kV HBM.

These devices are optimized for low-voltage operation as low as 1.8 V ±0.9 V and up to 5.5 V ±2.75 V. This latest addition of low-voltage CMOS automotive grade operational amplifiers provide a family of wide bandwidth, low noise, and low power that meet the needs of a wide variety of applications.