OPA180IDGKT
TEXAS INSTRUMENTS OPA180IDGKT 运算放大器, 单路, 2 MHz, 1个放大器, 0.8 V/µs, ± 2.25V 至 ± 18V, 4.5V 至 36V, VSSOP, 8 引脚
The is a low-noise rail-to-rail output Operational Amplifier uses zero-drift techniques to simultaneously provide low offset voltage 75µV and near zero-drift over time and temperature. This miniature, high-precision, low quiescent current amplifier offers high input impedance and rail-to-rail output swing within 18mV of the rails. The input common-mode range includes the negative rail. Either single or dual supplies can be used in the range of 4 to 36V ±2 to ±18V.
- .
- 10nV/√Hz Low noise
- .
- RFI filtered inputs
- .
- 0.1µV/°C Zero drift
- .
- Input includes negative rail
- .
- 525µA Maximum quiescent current
- .
- 114dB High CMRR
- .
- 250pA Typical low bias current
- .
- Green product and no Sb/Br
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
