锐单电子商城 , 一站式电子元器件采购平台!
  • 电话:400-990-0325

OPA3684IDBQT

OPA3684IDBQT

TI(德州仪器) 主动器件

具有禁用功能的低功耗三路电流反馈运算放大器 16-SSOP -40 to 85

The OPA3684 provides a new level of performance in low-power, wideband, current-feedback CFB amplifiers. This CFB_PLUS_ amplifier among the first to use an internally closed-loop input buffer stage that enhances performance significantly over earlier low-power CFB amplifiers. While retaining the benefits of very low power operation, this new architecture provides many of the benefits of a more ideal CFB amplifier. The closed-loop input stage buffer gives a very low and linearized impedance path at the inverting input to sense the feedback error current. This improved inverting input impedance retains exceptional bandwidth to much higher gains and improves harmonic distortion over earlier solutions limited by inverting input linearity. Beyond simple high-gain applications, the OPA3684 CFB_PLUS_ amplifier permits the gain setting element to be set with considerable freedom from amplifier bandwidth interaction. This allows frequency response peaking elements to be added, multiple input inverting summing circuits to have greater bandwidth, and low-power line drivers to meet the demanding requirements of studio cameras and broadcast video. The output capability of the OPA3684 also sets a new mark in performance for low-power current-feedback amplifiers. Delivering a full ±4Vp-p swing on ±5V supplies, the OPA3684 also has the output current to support > ±3Vp-p into 50. This minimal output headroom requirement is complemented by a similar 1.2V input stage headroom giving exceptional capability for single +5V operation.

The OPA3684s low 1.7mA/ch supply current is precisely trimmed at 25°C. This trim, along with low shift over temperature and supply voltage, gives a very robust design over a wide range of operating conditions. System power may be further reduced by using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, gives normal operation. If pulled LOW, the OPA3684 supply current drops to less than 100µA/ch while the I/O pins go to a high impedance state.

OPA3684IDBQT中文资料参数规格
技术参数

供电电流 1.7 mA

电路数 3

通道数 3

共模抑制比 53dB ~ 60dB

输入补偿漂移 12.0 µV/K

带宽 250 MHz

转换速率 820 V/μs

增益频宽积 1.9 GHz

输入补偿电压 1.5 mV

输入偏置电流 5 µA

可用通道 S, D, Q, T

工作温度Max 85 ℃

工作温度Min 40 ℃

3dB带宽 250 MHz

增益带宽 1.9 GHz

共模抑制比Min 51 dB

电源电压Max 12 V

电源电压Min 5 V

封装参数

安装方式 Surface Mount

引脚数 16

封装 SSOP-16

外形尺寸

长度 5 mm

宽度 4 mm

高度 1.5 mm

封装 SSOP-16

物理参数

工作温度 -40℃ ~ 85℃

其他

产品生命周期 Active

包装方式 Tape & Reel TR

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

OPA3684IDBQT引脚图与封装图
OPA3684IDBQT引脚图

OPA3684IDBQT引脚图

OPA3684IDBQT封装图

OPA3684IDBQT封装图

OPA3684IDBQT封装焊盘图

OPA3684IDBQT封装焊盘图

在线购买OPA3684IDBQT
型号 制造商 描述 购买
OPA3684IDBQT TI 德州仪器 具有禁用功能的低功耗三路电流反馈运算放大器 16-SSOP -40 to 85 搜索库存
替代型号OPA3684IDBQT
图片 型号/品牌/封装 代替类型 描述 替代型号对比

型号: OPA3684IDBQT

品牌: TI 德州仪器

封装: SSOP 210MHz 3Channel 14Pin

当前型号

具有禁用功能的低功耗三路电流反馈运算放大器 16-SSOP -40 to 85

当前型号

型号: OPA3684IDR

品牌: 德州仪器

封装: SOIC-14 210MHz 3Channel 14Pin

类似代替

具有禁用功能的低功耗三路电流反馈运算放大器 14-SOIC -40 to 85

OPA3684IDBQT和OPA3684IDR的区别

型号: SN10503PWP

品牌: 德州仪器

封装:

功能相似

高速轨至轨输出视频放大器 HIGH SPEED RAIL TO RAIL OUTPUT VIDEO AMPLIFIERS

OPA3684IDBQT和SN10503PWP的区别

型号: OPA3684ID

品牌: 德州仪器

封装: SOIC 210MHz 3Channel 14Pin

功能相似

高速运算放大器 Low-Power Triple Current Feedback

OPA3684IDBQT和OPA3684ID的区别