MAX197BEWI+T
数据手册.pdf模数转换器 - ADC Multi-Range 10V, 5V, +10V, +5V, Single +5V, 12-Bit DAS with 8+4 Bus Interface
数据采集系统(DAS) 12 b 100k 并联 28-SOIC
得捷:
IC DAS 12BIT 100K 28SOIC
立创商城:
MAX197BEWI+T
贸泽:
模数转换器 - ADC Multi-Range 10V, 5V, +10V, +5V, Single +5V, 12-Bit DAS with 8+4 Bus Interface
安富利:
The MAX197 multi-range, 12-bit data-acquisition system DAS requires only a single +5V supply for operation, yet accepts signals at its analog inputs that may span both above the power-supply rail and below ground. This system provides 8 analog input channels that are independently software programmable for a variety of ranges: ±10V, ±5V, 0V to +10V, or 0V to +5V. This increases effective dynamic range to 14 bits, and provides the user flexibility to interface 4mA-to-20mA, ±12V, and ±15V powered sensors to a single +5V system. In addition, the converter is overvoltage tolerant to ±16.5V; a fault condition on any channel does not affect the conversion result of the selected channel. Other features include a 5MHz bandwidth track/hold, a 100ksps throughput rate, software-selectable internal or external clock and acquisition, 8+4 parallel interface, and an internal 4.096V or an external reference.A hardware active-low SHDN pin and two programmable power-down modes STBYPD, FULLPD are provided for low-current shutdown between conversions. In STBYPD mode, the reference buffer remains active, eliminating start-up delays.The MAX197 employs a standard microprocessor µP interface. A three-state data I/O port is configured to operate with 8-bit data buses, and data-access and bus-release timing specifications are compatible with most popular µPs. All logic inputs and outputs are TTL/CMOS compatible.The MAX197 is available in 28-pin DIP, wide SO, SSOP, and ceramic SB packages.For a different combination of ranges ±4V, ±2V, 0V to 4V, 0V to 2V, refer to the MAX199 data sheet. For 12-bit bus interface, refer to the MAX196 and MAX198 data sheets.