LP38855S-1.2

TEXAS INSTRUMENTS  LP38855S-1.2  固定电压稳压器, LDO, 980 mV至5.5V, 130mV压差, 1.2V输出, 1.5A输出, TO-263-5

PMIC - 稳压器 - 线性 正 固定 1 输出 1.5A DDPAK/TO-263-5

立创商城:
正 Vin=5.5V Vout=1.2V 1.5A

得捷:
IC REG LINEAR 1.2V 1.5A DDPAK

e络盟:
固定电压稳压器, LDO, 980 mV至5.5V, 130mV压差, 1.2V输出, 1.5A输出, TO-263-5

艾睿:
This LDO LP38855S-1.2 linear regulator from Texas Instruments acts like a variable resistor to maintain a steady voltage level. Its typical dropout voltage at current is 0.13@1.5A V. It has an overall accuracy of ±2 %. This voltage regulation device&s;s single output can produce a current up to 1.5 A. The best way to provide power to your application is by using this, which needs a voltage of at least 1.38 V and no higher than 5.5 V. With a fixed output that has a voltage of 1.2 V, this is power management at its best. Your circuit has the capability to produce a constant current at its output by using a load regulation of 0.2%/ATyp and line regulation of 0.04%/VTyp. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 125 °C. Its polarity is positive. The maximum dropout voltage is 0.165@1.5A V.

Chip1Stop:
LDO Regulator Pos 1.2V 1.5A 6-Pin5+Tab TO-263 Rail

Verical:
LDO Regulator Pos 1.2V 1.5A 6-Pin5+Tab TO-263 Tube

Newark:
# TEXAS INSTRUMENTS  LP38855S-1.2  Fixed LDO Voltage Regulator, 980 mV to 5.5V, 130mV Dropout, 1.2Vout, 1.5Aout, TO-263-5