LM3560TLE-20/NOPB
LED照明驱动器 LIGHTING DISPLAY IC
General Description
The LM3560 is a 2MHz fixed frequency synchronous boost converter with two 1000 mA constant current drivers for high current white LEDs. The dual high-side current sources allow for grounded cathode LED operation and can be tied together for providing flash currents at up to 2A through a single LED.
An adaptive regulation method ensures the current for each LED remains in regulation and maximizes efficiency.
Features
■ Dual High-Side Current Sources Allow for Grounded Cathode LED Operation
■ Accurate and Programmable LED Current from 31.25 mA to 2A
■ Independent LED Current Source Programmability
■ Up to 90% Efficient
■ Ultra-Small Solution Size: < 26 mm2
■ Four Operating Modes: Torch, Flash, Privacy Indicate, and Message Indicator
■ 4-bit ADC for VLED Monitoring
■ LED Thermal Sensing and Current Scale-Back
■ Hardware Flash and Torch Enable
■ Dual Synchronization Inputs for RF Power Amplifier Pulse Events
■ LED and Output Disconnect During Shutdown
■ Open and Short LED Detection
■ 400 kHz I2C-Compatible Interface
■ Active Low Hardware Reset
■ 16-Bump 1.97mm x 1.97mm x 0.6mm micro SMD
Applications
■ Camera Phone LED Flash
■ White LED Biasing