ADAU1401AWBSTZ-RL

的SigmaDSP 28- / 56位音频处理器，内置两个ADC和四个DAC SigmaDSP 28-/56-Bit Audio Processor with Two ADCs and Four DACs

Product Details

The ADAU1401A is a complete, single-chip audio system with 28-/56-bit audio DSP, ADCs, DACs, and microcontroller-like control interfaces. Signal processing includes equalization, cross- over, bass enhancement, multiband dynamics processing, delay compensation, speaker compensation, and stereo image widening. This processing can be used to compensate for real-world limita-tions of speakers, amplifiers, and listening environments, providing dramatic improvements in perceived audio quality.

The signal processing of the ADAU1401A is comparable to that found in high end studio equipment. Most processing is done in full 56-bit, double-precision mode, resulting in very good low level signal performance. The ADAU1401A is a fully program-mable DSP. The easy to use SigmaStudio™ software allows the user to graphically configure a custom signal processing flow using blocks such as biquad filters, dynamics processors, level controls, and GPIO interface controls.

The ADAU1401A programs can be loaded on power-up either from a serial EEPROM through its own self-boot mechanism or from an external microcontroller. On power-down, the current state of the parameters can be written back to the EEPROM from the ADAU1401A to be recalled the next time the program is run.

Two Σ-Δ ADCs and four Σ-Δ DACs provide a 98.5 dB analog input to analog output dynamic. Each ADC has a THD + N of −83 dB, and each DAC has a THD + N of −90 dB. Digital input and output ports allow a glueless connection to additional ADCs and DACs. The ADAU1401A communicates through an I2C® bus or a 4-wire SPI port.

**Applications**

* Multimedia speaker systems

* MP3 player speaker docks

* Automotive head units

* Minicomponent stereos

* Digital televisions

* Studio monitors

* Speaker crossovers

* Musical instrument effects processors

* In-seat sound systems aircraft/motor coaches

Data Sheet, Rev. 0, 4/10

### Features and Benefits

.

28-/56-bit, 50 MIPS digital audio processor

.

2 ADCs: SNR of 100 dB, THD + N of −83 dB

.

4 DACs: SNR of 104 dB, THD + N of −90 dB

.

Complete standalone operation

.

Self-boot from serial EEPROM

.

Auxiliary ADC with 4-input mux for analog control

.

GPIOs for digital controls and outputs

.

Fully programmable with SigmaStudio graphical tool

.

28-bit × 28-bit multiplier with 56-bit accumulator for full double-precision processing

.

Clock oscillator for generating master clock from crystal

.

See Data Sheet for Additional Information