JB15KP

JB 系列 密封 单刀单掷 1.76 N 短 操作杆 扣接 帽盖 直 PC 触觉型

Series JB low profile process sealed tactiles meet sealing standard IP67 of IEC60529 similar to NEMA 4 & 13 and are ready for wave or manual soldering. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended the results do not produce hazardous energy. Series JB tactiles have not been tested for UL recognition or CSA certification.

立创商城:
JB-15KNP2

得捷:
SWITCH TACTILE SPST-NO 0.05A 24V

艾睿:
Want to use a force of pressure to turn on your circuit? Check out this low profile JB15KP tactile switch from NKK Switches. It has a SPST configuration. This device has a maximum current rating of 0.125 A @ 24VDC. This tactile switch has an operating temperature range of -25 °C to 70 °C. The JB15KP tactile switch has a PC pin termination style. This button actuator is 3 mm long. The maximum DC voltage rating is 24 VDC. This product is 12 mm long, 11.2 mm tall and 12 mm deep.

Allied Electronics:
Switch; Sealed; Tactile; SPST; OFF-ON; Non-Illum; Side Actuated; 0.05A; 24VDC; Str PC

Chip1Stop:
Switch Tactile OFF ON SPST Button PC Pins 0.125A 24VDC 5000000Cycles 1.76N Thru-Hole

Verical:
Switch Tactile OFF ON SPST Button PC Pins 0.125A 24VDC 5000000Cycles 1.76N Thru-Hole

Newark:
# NKK SWITCHES  JB15KP  Tactile Switch, Non Illuminated, 24 V, 50 mA, 1.76 N, Solder

Powell:
LOW PROFILE TACTILE/PC