JB15KP-1B

NKK SWITCHES  JB15KP-1B  轻触开关, 0.05A, 24VDC, 焊接

Series JB illuminated low profile process sealed tactiles meet sealing standard IP67 of IEC60529 similar to NEMA 4 & 13 and are ready for wave or manual soldering. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended the results do not produce hazardous energy. Series JB tactiles have not been tested for UL recognition or CSA certification.

得捷:
SWITCH TACTILE SPST-NO 0.05A 24V

e络盟:
轻触开关, 0.05A, 24VDC, 焊接

艾睿:
This low profile JB15KP-1B tactile switch from NKK Switches will turn your system on and off when there is a change in pressure. It has a SPST configuration. This device has a maximum current rating of 0.125 A @ 24VDC. This tactile switch has an operating temperature range of -25 °C to 70 °C. The JB15KP-1B tactile switch has a PC pin termination style. The maximum DC voltage rating is 24 VDC. This white square button actuator is 7 mm long. This product is 12 mm long, 11.2 mm tall and 12 mm deep.

Allied Electronics:
Switch; Sealed; Tactile; SPST; OFF-ON; Non-Illum; Sculpted Wht Cap; 0.05A; 24VDC; PC

Verical:
Switch Tactile OFF ON SPST Square Button PC Pins 0.125A 24VDC 5000000Cycles 1.76N Thru-Hole

Newark:
# NKK SWITCHES  JB15KP-1B  Tactile Switch, Non Illuminated, 24 V, 50 mA, 1.76 N, Solder

Powell:
LOW PROFILE TACTILE/PC