IS25LQ080-JBLE
数据手册.pdfNOR闪存 8M SPI, 8-pin SOP 208mil ET 2.3-3.6V
GENERAL DESCRIPTION
The IS25LQ080 is 8 Mbit Serial Peripheral Interface SPI Flash memories, providing single-, dual or quad output. The devices are designed to support a 33 MHz fclock rate in normal read mode, and 104 MHz in fast read Quad output is 100MHz, the fastest in the industry. The devices use a single low voltage power supply, ranging from 2.3 Volt to 3.6 Volt, to perform read, erase and program operations. The devices can be programmed in standard EPROM programmers.
FEATURES
• Single Power Supply Operation
\- Low voltage range: 2.3 V - 3.6 V
• Memory Organization
\- IS25LQ080: 1024K x 8 8 Mbit
• Cost Effective Sector/Block Architecture
\- 8Mb : Uniform 4KByte sectors / sixteen uniform 64KByte blocks
• Serial Peripheral Interface SPI Compatible
\- Supports single-, dual- or quad-output
\- Supports SPI Modes 0 and 3
\- Maximum 33 MHz clock rate for normal read
\- Maximum 104 MHz clock rate for fast read
\- Maximum 208MHz clock rate
\- Maximum 400MHz clock rate equivalent Quad SPI
• Byte Program Operation
\- Typical 10 us/Byte
• Page Program up to 256 Bytes Operation
\- Maximum 0.7ms per page program
• Sector, Block or Chip Erase Operation
\- Sector Erase 4KB150ms Typ
\- Block Erase 64KB500ms Typ
\- Chip Erase 2s 8Mb
• Low Power Consumption
\- Max 12 mA active read current
\- Max 20 mA program/erase current
\- Max 30 uA standby current
• Hardware Write Protection
\- Protect and unprotect the device from write operation by Write Protect WP# Pin
• Software Write Protection
\- The Block Protect BP3, BP2, BP1, BP0 bits allow partial or entire memory to be configured as read-only
• High Product Endurance
\- Guaranteed 100,000 program/erase cycles per single sector
\- Minimum 20 years data retention
• Industrial Standard Pin-out and Package
\- 8-pin 208mil SOIC
\- 8-pin 150mil VVSOP
\- 8-contact WSON
\- PDIP
\- Lead-free Pb-free package
•Additional 256-byte Security information one-time programmable OTP area
•Special protect function
- Safe guard function Appendix 1
- Sector unlock function Appendix 2