FP301-3/4-200'-CLEAR-SPOOL

Heat Shrink tubing; General Purpose:3/4, 2:1 Thin Wall, Clear

**Shrink Tubing for Every Application**

™ Heat Shrink Tubing Series FP-301 and Cold Shrink Connector Insulators Series 8420 offer an outstanding balance of electrical, physical, and chemical properties for a wide variety of industrial and military applications.

3M™ Heat Shrink Tubing FP-301 Series is split resistant, mechanically tough, easily marked, and resists cold flow. FP-301 tubing is rated for continuous operation at -67°F to 275°F, and is designed to withstand elevated temperatures to 572°F for short periods.

3M™ Cold Shrink Series 8420 are open-ended, tubular, rubber sleeves which are factory expanded and assembled onto a removable core. The core is removed after the tube has been positioned for installation over an inline connection and terminal lug, allowing the tube to shrink and form a water-resistant seal.

**Features**

* Simple, Safe Installation

* Accommodates a Wide Range of Cables

* No Torches or Heat Required

* Seals Tight, Retains Its Resiliency and Pressure

* Water-Resistant - Meets ANSI C119.1 Requirements

* Seals Without Mastic, Tape, or Adhesives