FH12-45S-0.5SV

0.5mm至1mm节距连接器对于FPC / FFC 0.5mm and 1mm Pitch Connectors For FPC/FFC

■Features

1\. Ease of Use and Space Savings

Only one finger or 6.9N Newtons of force is required to lock Hirose’s rotational actuator flip-lock as compared to using 2 fingers and 39.2N to close a FFC/FPC connector from our competition. The Flip-Lock design also allows customers to place 2 or more connectors side by side as there is no need to waste additional board space for a side latch.

2\. Strengthened Flip-lock Actuator

The standard Flip-Lock requires only 2.0mm height above the board. A strengthened lock lever is available which only requires an additional 0.4mm.

3\. Supports Thin FPC 0.18mm

Hirose does not require double-sided FPC to have any additional strengthening plate or stiffener and can

therefore support a thickness of as little as 0.18mm +/- 0.05.

4\. Hirose Ensures Reliability

Hirose’s patented half tuning fork contacts maintain the required normal force without relying on the connector housing. With our competitor’s conventional products the housing walls support the contact force,

which does not provide for long-term reliability.

5\. Prevention of Solder Bridge

Excess solder cavity absorbs excessive solder and avoids solder bridging.

6\. Three different assembly types

FH12 is offered in Top & Bottom Contact and Vertical Mount and offered in both a 0.5mm contact pitch as well as a 1.0mm contact pitch bottom contact only.